jevansio Posted April 26, 2008 Share Posted April 26, 2008 I've been tidying my engine bay of scruffy wires etc, I noticed 2 plugs that come from the coilpack harness & aren't used. They come from the lead that travels up the coilpacks on the exhaust side, the lead exits near the bulkhead nd they are tied up near the drivers side. Anyone know what they are for???, can I trim the harness back, or even trim the plugs off & rewire them so they don't need as much loom. I'll take a pic to illustrate in the morn if no one knows Quote Link to comment Share on other sites More sharing options...
Ric Posted April 26, 2008 Share Posted April 26, 2008 VSV on the TT setup its bundled in with the coil pack loom Quote Link to comment Share on other sites More sharing options...
jevansio Posted April 26, 2008 Author Share Posted April 26, 2008 VSV on the TT setup its bundled in with the coil pack loom Ahhh, I'll take pics tomorrow just to confirm, if that's what the are I guess they can go Quote Link to comment Share on other sites More sharing options...
Ric Posted April 26, 2008 Share Posted April 26, 2008 it 100% deffo is, i had to remove them when i did the coilpacks + VSOS & thats where they went Quote Link to comment Share on other sites More sharing options...
jevansio Posted April 26, 2008 Author Share Posted April 26, 2008 it 100% deffo is, i had to remove them when i did the coilpacks + VSOS & thats where they went Many thanks Ric, makes the engine bay that little bit tidier Quote Link to comment Share on other sites More sharing options...
jevansio Posted April 27, 2008 Author Share Posted April 27, 2008 I removed them today & everything works as normal, cheers Ric Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted April 27, 2008 Share Posted April 27, 2008 You removed them?!?!?!?!?!? Thats ok As confirmed by Ric, definately VSV wire loom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.