*NEW* Quad Fuel Pump Bracket - Fits all pumps in one!

[Joeatphr]

Bringing top notch products again we aim to raise the bar. We're currently accepting reservations for the new Powerhouse Racing QUAD fuel pump hanger. This quad pump hanger will work 100% perfectly with 1, 2, 3, or 4 pumps. You do not have to have 4 pumps in there for this to be a terrific solution.

The new quad fuel pump hanger features:

Billet T6 6061 aluminum construction
4 pump bucket for maximum fuel delievery
Twin -8AN feed fitting but can be reduced to -6AN
-4AN vent barb
-6AN return barb for easy use with existing fuel line
Accomodation for fuel level sensor
Clearance for the steel cap
Fuel resistant connector
All hardware needed for easy install

This quad fuel pump hanger delievers the maximum amount of fuel possible for the guys looking for the most amount of horsepower possible. This will be the best billet Walbro fuel pump on the market, deliever the most power potential, have the best possible fit, and keep in line with the top PHR quality that everyone has come used to.

The introductary price is $435 for the members reserved on the prebuy, with the price to rise to $499 afterwards.

Hope everyone gets in on the good deal!

Cheers,
Joe

[michael]

Interesting timing :)

Any pics? Plans to do one that's suitable for OEM pumps?

[Wez]

:lol:

[Thorin]

I'm holding out for the 5 pump hanger.

[bolarbag]

As much as I like doing business with you Joe...your having a laugh now ha!;)

I'm not sure I've heard of any Supra in the UK using 4 Walbro's...if they needed that amount of fueling wouldnt they be using the Bosch 044...or something even bigger!

Good crack though lol!

Quote...I'm holding out for the 5 pump hanger.

Classic!!

[JustGav]

Need a bigger fuel tank with that :)

4 pumps at 255l/hr = 1020l/hr max capacity (ignoring pipe restrictions and real world stuff :))

17l/min or basically an empty fuel tank in around 4 minutes.

[Sharpie]

17l/min or basically an empty fuel tank in around 4 minutes.

Is that Jspec fuel tank then :p

[V8 Killer]

I think Joe failed to mention a very crucial fact.

This quad pump hanger will work 100% perfectly with 1, 2, 3, or 4 pumps. You do not have to have 4 pumps in there for this to be a terrific solution.

I can't speak for PHR sales, but I can tell you several of your fellow countrymen have bought the PHR triple pump hanger from MVP, so obviously there is some demand.

This quad pump hanger cost no more than the triple pump, and it works with 3 pumps as well as 4. So its a better solution for those needing 4 pumps, which yes we do have those customers. No one in the U.K. yet has approached me, but we've had requests from Denmark, Sweden, UAE, Saudi, Australia, and of course the USA just off the top of my head.

I'm all for having a poke @ PHR (or anyone including myself) in good fun, but in all seriousness this is a really cool product to replace the triple pump hanger with. At no additional cost from the triple hanger, there is no reason not to get this if you were already considering the triple pump hanger. Several customers have bought the triple hanger from me and are currently using only 2 neatly organized pumps, but are ready for the expansion to the 3rd pump when needed.

[Shameless plug] Of course for those of you who prefer to use 2 or 3 Toyota OEM / Denso pumps, that is why MVP and TTC are developing a triple pump hanger for the larger OEM pumps, as we just announced in the MVP sub-forum. ;) [/Shameless plug]

Cheers,

Dusty

[JustGav]

Apologies for hijacking the thread, was meant in humour and little bit of technical info for those people who really need big fuel systems (and it will happen) :)

As Dusty has said though, just because it has 3 or 4 doesn't mean you have to put in all the pumps.

Not sure if this is the right place, but has anyone thought of putting together a pump monitoring system for these multi-pump setups?

[Joeatphr]

I think Joe failed to mention a very crucial fact.

This quad pump hanger will work 100% perfectly with 1, 2, 3, or 4 pumps. You do not have to have 4 pumps in there for this to be a terrific solution.

I can't speak for PHR sales, but I can tell you several of your fellow countrymen have bought the PHR triple pump hanger from MVP, so obviously there is some demand.

This quad pump hanger cost no more than the triple pump, and it works with 3 pumps as well as 4. So its a better solution for those needing 4 pumps, which yes we do have those customers. No one in the U.K. yet has approached me, but we've had requests from Denmark, Sweden, UAE, Saudi, Australia, and of course the USA just off the top of my head.

I'm all for having a poke @ PHR (or anyone including myself) in good fun, but in all seriousness this is a really cool product to replace the triple pump hanger with. At no additional cost from the triple hanger, there is no reason not to get this if you were already considering the triple pump hanger. Several customers have bought the triple hanger from me and are currently using only 2 neatly organized pumps, but are ready for the expansion to the 3rd pump when needed.

[Shameless plug] Of course for those of you who prefer to use 2 or 3 Toyota OEM / Denso pumps, that is why MVP and TTC are developing a triple pump hanger for the larger OEM pumps, as we just announced in the MVP sub-forum. ;) [/Shameless plug]

Cheers,

Dusty


Thanks for that bit Dusty, and indeed he is dead on! We have came out with this idea to supply you with whatever need you have for 1, 2, 3, or 4 pumps, also will allow us to have this for our Stage 4 Fuel System and be a better demand and open a broader range to cover everyone's need!

This brings a brand new design to the hanger and doesnt use the OEM Plug anymore and features a much higher quality plug to supply power and ground to every pump and sending unit. You cant go wrong with this item for any application.

Cheers,
Joe