captainchaos Posted April 14, 2008 Share Posted April 14, 2008 Whats everyones opinions on which are the best plugs to use for a single turbo? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 14, 2008 Share Posted April 14, 2008 spark plugs Quote Link to comment Share on other sites More sharing options...
Alex Posted April 14, 2008 Share Posted April 14, 2008 spark plugs I'd agree with that Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 14, 2008 Author Share Posted April 14, 2008 had a look on but there is no pointers to which one people recomend with big singles Quote Link to comment Share on other sites More sharing options...
Alex Posted April 14, 2008 Share Posted April 14, 2008 had a look on but there is no pointers to which one people recomend with big singles Really? Single Turbo/Big Twins @ upto 1.3bar NGK - BCPR7ES (3330) - gap 0.7mm NGK - BKR7E (6097) - gap 0.7mm NGK - BKR8E - gap to 0.7mm NGK Iridium - BKR7EIX/BKR8EIX - leave gap alone Denso Iridium - IK24 - leave gap alone Single Turbo/Big Twins @ upto 1.8bar NGK - BCPR8ES - gap 0.6-0.7mm NGK - BKR8E - gap 0.6-0.7mm NGK Iridium - BKR8EIX - leave gap alone Denso Iridium - IK27 - leave gap alone Single Turbo/Big Twins @ 2+bar NGK - BCPR8ES - gap 0.6mm ??? UNTESTED NGK - BKR8E - gap 0.6mm ??? UNTESTED NGK Iridium - BKR8EIX or BKR9EIX? - leave gap alone ??? UNTESTED Denso Iridium - IK27 to IK31 - leave gap alone ??? UNTESTED So the NGK Iridium's you mentioned in that thread arn't in there then, no? Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 14, 2008 Author Share Posted April 14, 2008 Single Turbo/Big Twins @ 2+bar NGK - BCPR8ES - gap 0.6mm ??? UNTESTED NGK - BKR8E - gap 0.6mm ??? UNTESTED NGK Iridium - BKR8EIX or BKR9EIX? - leave gap alone ??? UNTESTED Denso Iridium - IK27 to IK31 - leave gap alone ??? UNTESTED hmmm Quote Link to comment Share on other sites More sharing options...
Alex Posted April 14, 2008 Share Posted April 14, 2008 So you're running 2+ bar?! If you are you should be talking to your engine builder, not referencing the internet... I've removed your other post asking the same question... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.