damientt Posted April 13, 2008 Share Posted April 13, 2008 Duhhhhhh - subject should have read "Auto Gear Lever Lights" The lights beside/below my gear lever (the gear selector indicator lights - R, D, etc.) seem to have gone out. Everything else appears to be OK so I assume it's not a blown fuse. I removed the plastic gear lever surround but couldn't see any obvious bulbs to replace and I didn't want to start taking anything else out. Any ideas??????????? Quote Link to comment Share on other sites More sharing options...
Pixelfill Posted April 13, 2008 Share Posted April 13, 2008 There is a bulb in there, it's a bitch to get to, but there is one. IIRC it's a strange wattage too. Mike Quote Link to comment Share on other sites More sharing options...
Pixelfill Posted April 13, 2008 Share Posted April 13, 2008 http://www.mkivsupra.net/vbb/showthread.php?p=816116&postcount=11 Mike Quote Link to comment Share on other sites More sharing options...
damientt Posted April 14, 2008 Author Share Posted April 14, 2008 Thanks for the help. I replaced the original blown bulb with a blue LED so it now matches my blue dash conversion :) A bit of advice. I used a small spanner (8mm?) to remove & re-mount the bulb holder ... makes it a bit easier. Quote Link to comment Share on other sites More sharing options...
Pabs Posted April 14, 2008 Share Posted April 14, 2008 do you know what the bulb type was? A 1.4W capless bulb, but which type? Or is there only 1? Thanks Quote Link to comment Share on other sites More sharing options...
damientt Posted April 14, 2008 Author Share Posted April 14, 2008 There is only one bulb. I had a spare blue multi-LED bulb left over from my blue dash conversion which fitted perfectly. I'm not sure about the bulb type but it's one of the large bulbs used to illuminate the dash clocks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.