Guest redberet2252 Posted April 8, 2008 Share Posted April 8, 2008 Hi Guys, Looking for someone in scotland that can fit the mesh on to the front grills, anyone help. Now added some pics of my new baby David Quote Link to comment Share on other sites More sharing options...
st3ven1 Posted April 10, 2008 Share Posted April 10, 2008 Hi, nice looking supra you have there. Where abouts in tayside are you? Here is a link to a step by step mesh fitting guide: http://www.mkivsupra.net/vbb/showthread.php?t=40235 Might be worth a read to see if you fancy having ago youself. Quote Link to comment Share on other sites More sharing options...
Silver Fox Posted April 11, 2008 Share Posted April 11, 2008 Ive never fitted mesh before and i did mine last week with ease. Its very straight forward mate Quote Link to comment Share on other sites More sharing options...
Guest redberet2252 Posted April 11, 2008 Share Posted April 11, 2008 Hi, nice looking supra you have there. Where abouts in tayside are you? Here is a link to a step by step mesh fitting guide: http://www.mkivsupra.net/vbb/showthread.php?t=40235 Might be worth a read to see if you fancy having ago youself. Hi In Dundee, seems a bit fiddly fixing the mesh, maybe try and get someone to do it David Quote Link to comment Share on other sites More sharing options...
Guest redberet2252 Posted April 11, 2008 Share Posted April 11, 2008 Ive never fitted mesh before and i did mine last week with ease. Its very straight forward mate Hi Did you fit it with the bumper on, was it easy and of course hows it done then D Quote Link to comment Share on other sites More sharing options...
AndrewOW Posted April 11, 2008 Share Posted April 11, 2008 Hi David. Sorry I didn't get back to you from your PM. I've been very busy on other things recently. I just got my local bodyshop to do mine Suprasuzuki did a very good job on his. Might be worth searching for his method. HTH Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 11, 2008 Share Posted April 11, 2008 Ways of fixing mesh to front grill, take off bumper;) measure the approximate size of aperture, and cut out your mesh approximately 2-3 inches bigger than that, depending on the mesh type, hold in place and mould/bend it around the edge, providing you have an edge, if some bit are flat then its a bit harder to get it in place, if you want it to be permanent then you can just use fibreglass Bridger paste and apply it at strategic places around the edge, so as it squeezes through the mesh onto the fibreglass/plastic of the bumper, having cleaned the area before you started;) If you want to be able to remove it the i find the best thing to use is some stainless steel wire bonded around the edge of the aperture,with the bridger, which you can then lace into the mesh to hold it, some people use cable ties also. Quote Link to comment Share on other sites More sharing options...
AndyT Posted April 11, 2008 Share Posted April 11, 2008 This stuff is pricey, but comes ready to fit properly without removing the bumper. Quality too. http://www.mkivsupra.net/vbb/showthread.php?t=112764&highlight=mesh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.