johnny g Posted March 24, 2008 Share Posted March 24, 2008 I was thinking about mounting the box here, just cut the panel, recess it in so that panel sits flush, just with the knob protruding. How have others mounted theres? Look forward to seeing Quote Link to comment Share on other sites More sharing options...
imi Posted March 24, 2008 Share Posted March 24, 2008 I've mounted mine under to the dimmer switch on the right Quote Link to comment Share on other sites More sharing options...
gaz1 Posted March 24, 2008 Share Posted March 24, 2008 have mine inside the centre cubbyhole;) Quote Link to comment Share on other sites More sharing options...
markssupra Posted March 24, 2008 Share Posted March 24, 2008 Mine's in the ashtray Quote Link to comment Share on other sites More sharing options...
johnny g Posted March 24, 2008 Author Share Posted March 24, 2008 Dimmer switch area sounds quite neat. I think I might get a facelift dash panel to cut it out (in case I screw up) Quote Link to comment Share on other sites More sharing options...
Nic Posted March 24, 2008 Share Posted March 24, 2008 How have others mounted theres? Look forward to seeing I removed the insides from the box, drilled the dash and mounted behind like this. http://img367.imageshack.us/img367/5277/p1020824ey2.jpg Quote Link to comment Share on other sites More sharing options...
Pixelfill Posted March 24, 2008 Share Posted March 24, 2008 anyone got any other inspired mounts for the Digital Adjuster whilst we are at it? edit: somehow I missed yours Gaz Mike Quote Link to comment Share on other sites More sharing options...
johnny g Posted March 24, 2008 Author Share Posted March 24, 2008 I removed the insides from the box, drilled the dash and mounted behind like this. http://img367.imageshack.us/img367/5277/p1020824ey2.jpg Now that looks trick.Bit over my head though doing that. I'd quite like to have the RL box visible (just for bragging rights lol). Quote Link to comment Share on other sites More sharing options...
Nic Posted March 24, 2008 Share Posted March 24, 2008 Now that looks trick.Bit over my head though doing that. It was very easy to do, all the components are mounted on a circuit board inside the box. Just 3 holes to drill, one for the knob one for the button and one for the LED. The circuit board is then held in place by the screw nut behind the adjuster knob. On mine I filled the 3 holes under the stereo in first, but it would be easy to mount the same either where you have shown or on the ignition panel on the other side. Quote Link to comment Share on other sites More sharing options...
Sharpie Posted March 24, 2008 Share Posted March 24, 2008 Me too. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted March 24, 2008 Share Posted March 24, 2008 Great work Nic and Pete. Both look fantastic. Here's a picture of mine: Quote Link to comment Share on other sites More sharing options...
Steve Posted March 24, 2008 Share Posted March 24, 2008 Mine is below the dimmer for the dashlights, just the front cover part, not the backbox bit. Quote Link to comment Share on other sites More sharing options...
Pete Posted March 25, 2008 Share Posted March 25, 2008 I've just stuck mine on the dash in the same place as you Johnny. Reversible. Quote Link to comment Share on other sites More sharing options...
johnny g Posted March 25, 2008 Author Share Posted March 25, 2008 I've just stuck mine on the dash in the same place as you Johnny. Reversible. I'm probably going to plonk it there, but I'll cut it out and flush mount it. Thanks everyone! Quote Link to comment Share on other sites More sharing options...
imi Posted April 6, 2008 Share Posted April 6, 2008 better late than never Quote Link to comment Share on other sites More sharing options...
johnny g Posted April 6, 2008 Author Share Posted April 6, 2008 Nicely done Quote Link to comment Share on other sites More sharing options...
Sharpie Posted April 6, 2008 Share Posted April 6, 2008 imi, is that the whole box cut into your dash ? OR Is it just the front part of the box being held onto the outside of the dash by the 3 items/button's. (You drilled 3 holes and the gubbins is behind the dash) Like my photo but, you just put the front of the box inbetween the button's/LED and the dash face ? Looks nice. Quote Link to comment Share on other sites More sharing options...
imi Posted April 7, 2008 Share Posted April 7, 2008 imi, is that the whole box cut into your dash ? OR Is it just the front part of the box being held onto the outside of the dash by the 3 items/button's. (You drilled 3 holes and the gubbins is behind the dash) Like my photo but, you just put the front of the box inbetween the button's/LED and the dash face ? Looks nice. bingo done by Mark @ Sextons btw. Quote Link to comment Share on other sites More sharing options...
Sharpie Posted April 7, 2008 Share Posted April 7, 2008 Thanks. Quote Link to comment Share on other sites More sharing options...
bmx1lew Posted April 7, 2008 Share Posted April 7, 2008 sorry to go off the topic of installing the rltc, How much are they.. after my little spin out dont want to hit any more curbs Lew. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.