GoliathJay Posted March 22, 2008 Share Posted March 22, 2008 There is a slight knocking when accelterating hard through 1st, 2nd & 3rd. I was told this was due to sub frame/engien mounts needing to be re-tourqued. Any one have diagram/photos of where the mounts are, and how what lbs/ft they need to be torqued too. Quote Link to comment Share on other sites More sharing options...
AndyT Posted March 22, 2008 Share Posted March 22, 2008 http://mkivsupra.net/vbb/showthread.php?p=1466859&highlight=manuals#post1466859 See Nic's post for the Toyota manuals mate. Also do a search for CJ, a member here doing a group buy on the proper manuals for about 50 quid. If you can get these it's the best money you'll spend on the car. Quote Link to comment Share on other sites More sharing options...
simbasupra Posted March 22, 2008 Share Posted March 22, 2008 Here's the subframe bolt torques: I also have this noise problem, i had a look underneath and my propshaft seal had been leaking onto the rear engine/transmission mounting, i think this has caused the rubber in the mounting to become weak. Also one of the front engine mountings was weaping. Therefore i have purchased a full set of TRD engine mountings from Nic at an incredible price. Here's the engine mount locations: Quote Link to comment Share on other sites More sharing options...
GoliathJay Posted March 22, 2008 Author Share Posted March 22, 2008 Thanks guys! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.