hulse Posted March 2, 2008 Share Posted March 2, 2008 I got some dails from steve ( cheers Steve ) cant find a thread on how to fit them or is anyone in the North east available to lend a hand, its just the wiring up part im concerned about, Thanks John Quote Link to comment Share on other sites More sharing options...
supra steveo Posted March 2, 2008 Share Posted March 2, 2008 ahh hello mate i am still in germany so i cant do it for you can talk you through it thought Quote Link to comment Share on other sites More sharing options...
supra steveo Posted March 2, 2008 Share Posted March 2, 2008 what ever you do dont take the needles off take the 5 screws holding the top part of the dash on , out and remove it, remove the center dial surround, then remove one screw on each side to take off the other 2 panels surrounding it (need to take all the dash panels off really) then there are 4 screws holding the dial cluster in take them out and turn the dials over, then remove the 4 large bulbs and follow the curcuit to find the small buylb at the end of the curcuit. ( now this bit is hard to discribe )then fit the dials over the needles, put the neddle throught the center hole and hold the bottm bit down under the needle until the dial goes completly over the needle then conect all the dials to the switch and solder the red and black wire to the first bulb copper contacts i think i put the picture on the first group buy thread Quote Link to comment Share on other sites More sharing options...
hulse Posted March 2, 2008 Author Share Posted March 2, 2008 so the first thing i do is remove the needles LOL. Im ok at fitting the dials it just the soldering im not sure on, Im really good at mechanical stuff its electrics that scare me. anyone out there near me fancy having a shot, Quote Link to comment Share on other sites More sharing options...
supra steveo Posted March 2, 2008 Share Posted March 2, 2008 all it is is 2 solder point its dead easy or pop to halfords in the silver link and go see driving the dreams bro Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted March 2, 2008 Share Posted March 2, 2008 Its a horrible job on a Supra Quote Link to comment Share on other sites More sharing options...
supra steveo Posted March 2, 2008 Share Posted March 2, 2008 no its easy, there is only 2 points to solder and they are off the first bulb Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted March 2, 2008 Share Posted March 2, 2008 no its easy, there is only 2 points to solder and they are off the first bulb Just dials in general I mean, fiddly and fragile. Quote Link to comment Share on other sites More sharing options...
hulse Posted March 2, 2008 Author Share Posted March 2, 2008 when you back in the area Steve LOL Quote Link to comment Share on other sites More sharing options...
supra steveo Posted March 2, 2008 Share Posted March 2, 2008 sunner maybe august thats if i cant get back any sooner i am due a posting back to the UK with 10 days extra leave because of the move so might have to pop up Quote Link to comment Share on other sites More sharing options...
liam1 Posted March 2, 2008 Share Posted March 2, 2008 hi hulse kev shek who lives in wallsend fitted mine me gauges and done me boot build i can put you in touch with if you want mate he is very good and always willing to help regards lee. Quote Link to comment Share on other sites More sharing options...
hulse Posted March 2, 2008 Author Share Posted March 2, 2008 hi hulse kev shek who lives in wallsend fitted mine me gauges and done me boot build i can put you in touch with if you want mate he is very good and always willing to help regards lee. http://i172.photobucket.com/albums/w21/woolm1000/101_0117.jpg http://i172.photobucket.com/albums/w21/woolm1000/100_1410.jpg http://i172.photobucket.com/albums/w21/woolm1000/100_1411.jpg http://i172.photobucket.com/albums/w21/woolm1000/myphonepics392.jpg Looking good mate very nice, Yeh if you could put me in touch it would be a great help Quote Link to comment Share on other sites More sharing options...
supra steveo Posted March 2, 2008 Share Posted March 2, 2008 alreet liam have you done the blue shift lights yet? is kev the guy with the primera? if it is i think i know him through a mate too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.