captainchaos Posted February 29, 2008 Share Posted February 29, 2008 Seen a few other single turbo builds with the greddy plenum but they dont have it on, is it needed or been relocated. Quote Link to comment Share on other sites More sharing options...
b_have Posted February 29, 2008 Share Posted February 29, 2008 Thats the brake servo vacuum feed. You don't need it if you have strong legs Quote Link to comment Share on other sites More sharing options...
captainchaos Posted February 29, 2008 Author Share Posted February 29, 2008 Sorry my mind was at a blank when i was at work its the ISCV. The vacumm pipe for the brakes connects direct to the inlet plenum. Quote Link to comment Share on other sites More sharing options...
b_have Posted February 29, 2008 Share Posted February 29, 2008 I used a relocated iacv but removed the watercooling. Seems to work fine. Quote Link to comment Share on other sites More sharing options...
supradibbs Posted February 29, 2008 Share Posted February 29, 2008 thats the idle control valve i removed mine and the ecu takes care of cold start Quote Link to comment Share on other sites More sharing options...
b_have Posted March 1, 2008 Share Posted March 1, 2008 thats the idle control valve i removed mine and the ecu takes care of cold start How can it without it, Or are you fbw? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.