dannypunto Posted February 6, 2008 Share Posted February 6, 2008 ive just brought one of these and im shocked and the poor quality fitment of it, nothin seems to line up and the plastic is waffer thin, anybody else had a problem fitting one, really gutted as i thought i was buyin a quality product! Quote Link to comment Share on other sites More sharing options...
Jezz Posted February 6, 2008 Share Posted February 6, 2008 Fitted one of these to a customers car yesterday, supplied by Envy. The fit and finish were perfect?! Took me all of 5 minutes to install. Perhaps yours is a cheap copy? Quote Link to comment Share on other sites More sharing options...
magictorch Posted February 6, 2008 Share Posted February 6, 2008 Got one sat here next to me waiting to go on my car, we test fitted it and it lined up ok, where have you got yours from?? Quote Link to comment Share on other sites More sharing options...
dannypunto Posted February 6, 2008 Author Share Posted February 6, 2008 something aint right here then, the fitment is crap!, apparently not a cheap copy, i brought it off a member who brought it off whiffin, comes in the greddy box and everything, i take it this should just fit over the original a-piller and the screw into it, ive tried this and there caps everywhere, and i mean big gaps! and it all lokks twisted? Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted February 6, 2008 Share Posted February 6, 2008 I bought a full Greddy A-Pillar twin gauge pod from Miami-GT a while back and it was perfect Quote Link to comment Share on other sites More sharing options...
merckx Posted February 6, 2008 Share Posted February 6, 2008 i take it this should just fit over the original a-piller and the screw into it I didn't realise that they made them to fit like this. Quote Link to comment Share on other sites More sharing options...
Jezz Posted February 6, 2008 Share Posted February 6, 2008 something aint right here then, the fitment is crap!, apparently not a cheap copy, i brought it off a member who brought it off whiffin, comes in the greddy box and everything, i take it this should just fit over the original a-piller and the screw into it, ive tried this and there caps everywhere, and i mean big gaps! and it all lokks twisted? I didn't realise that they made them to fit like this. Same as. Genuine Greddy pods are a Replacement pillar trim. They dont fit over the oem trim, you have to remove it, then it fits in its place. Quote Link to comment Share on other sites More sharing options...
merckx Posted February 7, 2008 Share Posted February 7, 2008 No wonder it wouldn't fit. Quote Link to comment Share on other sites More sharing options...
dannypunto Posted February 7, 2008 Author Share Posted February 7, 2008 god i was sooooo close to gettin the dremmil cutter out to and hacking it to death Quote Link to comment Share on other sites More sharing options...
dannypunto Posted February 7, 2008 Author Share Posted February 7, 2008 ok well...errr now i tried that and it fits pretty good, i need to catch up on my japanese then i could have understood the instructions! Quote Link to comment Share on other sites More sharing options...
mikeyb10supra Posted February 7, 2008 Share Posted February 7, 2008 Same as. Genuine Greddy pods are a Replacement pillar trim. They dont fit over the oem trim, you have to remove it, then it fits in its place. my greddy one from envy wasn't....I had to bolt it to the original a-pillar Quote Link to comment Share on other sites More sharing options...
Epic Posted February 7, 2008 Share Posted February 7, 2008 I got a single pod pillar and thats screwed into place. got it from a member here and hes done a pritty good job attaching it to the original pillar... seems strong enough to Quote Link to comment Share on other sites More sharing options...
merckx Posted February 7, 2008 Share Posted February 7, 2008 god i was sooooo close to gettin the dremmil cutter out to and hacking it to death I'm sure we've all done daft things like this in one way or other. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.