BIG BLUE Posted February 5, 2008 Share Posted February 5, 2008 I thought I would have a go at making up a gauge pod for the lower glove box. What are your opinions on it? (positive or negative?) I think it ties in well with the interior, but it is always get opinions from a wider audience. The photos taken were at a pre final positioning / wiring of the gauges stage. Plus I have since re-straightened the edging I used. Quote Link to comment Share on other sites More sharing options...
mikeyb10supra Posted February 5, 2008 Share Posted February 5, 2008 Looks like a tidy job mate....very stealth Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 5, 2008 Share Posted February 5, 2008 Thats a nice job. Quote Link to comment Share on other sites More sharing options...
Ric Posted February 5, 2008 Share Posted February 5, 2008 but how would u see it from the drivers seat?? Quote Link to comment Share on other sites More sharing options...
BIG BLUE Posted February 5, 2008 Author Share Posted February 5, 2008 but how would u see it from the drivers seat?? I am 6 feet 5 and 19 stone, so I could see gauges in the passenger footwell, let alone the glovebox mate Quote Link to comment Share on other sites More sharing options...
Lee P Posted February 5, 2008 Share Posted February 5, 2008 Looks very nice, although I wouldnt want to look over at them while I was driving hard. I find it hard enough looking at mine and they are right in front of me. Quote Link to comment Share on other sites More sharing options...
BIG BLUE Posted February 5, 2008 Author Share Posted February 5, 2008 Looks very nice, although I wouldnt want to look over at them while I was driving hard. I find it hard enough looking at mine and they are right in front of me. Agreed! I think I need a co-pilot maybe;) Quote Link to comment Share on other sites More sharing options...
BIG BLUE Posted February 5, 2008 Author Share Posted February 5, 2008 I am running boost and AFR gauges, around the standard dials, dash mounted and plan to locate an EGT in the last remaining dash air vent. Quote Link to comment Share on other sites More sharing options...
Epic Posted February 5, 2008 Share Posted February 5, 2008 Apart from location, job well done! nice of you to share your pics as well. i also use autogauge dials n find them nice to install and look the dog nuts Quote Link to comment Share on other sites More sharing options...
markssupra Posted February 6, 2008 Share Posted February 6, 2008 Very good Neil Quote Link to comment Share on other sites More sharing options...
supra_aero Posted February 6, 2008 Share Posted February 6, 2008 looks wiked as usual neil. When and if you come to sell it, first dibs Quote Link to comment Share on other sites More sharing options...
TRD3000GT Posted February 7, 2008 Share Posted February 7, 2008 what are they mounted on ? Quote Link to comment Share on other sites More sharing options...
BIG BLUE Posted February 7, 2008 Author Share Posted February 7, 2008 what are they mounted on ? The dials are mounted into a flat carbon panel, via the standard dial attachers from the back. The panel is then actually fused into the angle of the lower glove compartment, with holes to the rear for the dial wires Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.