Bomex front bumper £300 delivered!

[knight-racer]

Bomex front bumpers

http://i120.photobucket.com/albums/o180/knight_racer/Supra/CIMG2304.jpg

http://i120.photobucket.com/albums/o180/knight_racer/Supra/DSC_0631a.jpg


Fully prep, smoothed, primed, all holes pre-drilled and even meshed!

£300 including delivery (within UK mainland)

[Ady]

I have to reply to this thread because im not 100% pleased with the one I got from you before xmas.

The mesy was shabby. Very shabby to be fair.

I left the bumper in a level flat surface for about a month. It decided to kink on the bottom, it looked like shit. I had to get a body shop to run support bars under it to streighten it out.

The primer is also not worth having, as I had to have mine primed again as it had scratches and imperfections in it, mine certainly was not ''smoothed''

Apart from that it was ok, Delivery and packaging was ok.

Next time I might try my luck with a replica from ebay for half the price, as Ive spent alot of time and effort to get it upto scratch befor getting her sprayed.

Not being an arse, just leaving my feedback.

[knight-racer]

Sorry Ady, was unaware you had to have extra work done to it. We do apologise.

These are a new batch of bumpers we have had made, and quite a few members have had them on this forum, and i've had good feedback on both quality and fitment.

[knight-racer]

Here are some photos of the ones we have in stock now:

http://i120.photobucket.com/albums/o180/knight_racer/Supra/Supra_bomex_front01.jpg

Those of you who have FMIC fitted we need the front tray section trimmed to fit.

http://i120.photobucket.com/albums/o180/knight_racer/Supra/Supra_bomex_front02.jpg

http://i120.photobucket.com/albums/o180/knight_racer/Supra/Supra_bomex_front03.jpg

We got "clips" made into the fibreglass which hold the mesh, this means you can remove and replace the mesh easily.

Even got a platform made for the angel lights to sit on.

http://i120.photobucket.com/albums/o180/knight_racer/Supra/Supra_bomex_front04.jpg

[Ady]

thats exactally the same one I had - If you look at the pictures you have put up then you can see the ''kink'' starting to form.

Give it a few weeks and it will ''pop'' up - and will take a hell of a lot of work to get back streight again.

Look at the picture of the bumper streight on - where the main mesh is, bottom left hand side - exactally where mine kinked.

And whoever put the mesh on had put it on to tight, I think this is what is causing them to riase up out of shape.

[knight-racer]

Sorry Ady, although we would have expected you to have told us directly at the time, but all I can do now is apologise that has happened.

It hasnt happened to any other Bomex front bumpers that we've sold, fitted or the ones that are sat in stock now for weeks.

[Ady]

Reason I never told you is it went into my spare room for about 5 weeks. Then when it went for spraying I noticed these problems.

Its sorted now anyways Jo.

[hoff]

Ive had 2 Bomex bumpers from Joe and Albert and they have both been spot (until the 1st one went into a grass verge:rolleyes:). I dont want to get involved in a disagrement but I thought Id just give another point of view:)