View Full Version : Cambridge area meet
Terminator
30-10-03, 22:05
Next Thurday is the first of the month.
Are we on for a see the bar staff meet?
Oooooohhhh im off for a week then, might have to steal me dads accord and come and meet you guys.
I can make this and I'll go the right way this time...:)
Can someone remind me of the name of the pub and the road please...?
Cheers
richardharmon
03-11-03, 12:21
Nick - Will be good to see you, to assist your endeavour here is the address of the pub and the multimap link.
Ferryboat Inn
Holywell
St. Ives
Cambridgeshire
PE27 4TG
Multimap Link (http://www.multimap.com/map/browse.cgi?&pc=PE274TG)
Follow the signs for Needingworth. When you get to Needingworth go into the village (the speed limit drops to 30) Holywell is signposted, it's a right-hand turn (quite a small road really). If memory serves the signpost is on the left hand and side pointing to the road you need to take on the right.
Hope this helps,
Richard.
FaithStalker
03-11-03, 12:21
I could make it when i saw you on Saturday @ the Garden Centere Terminator,
buts its come about that i cannot,
Friends for Dinner (not the program but would be actually doing it real life )
if things change i'll post a message
dammit - thats 2 in a row i've missed !
:(
Andy/Bob, you guys going? DOn't really want to take the mondeo but I could drive to your place and then chaffeur you there in Bobbehs car :D
Richard - Thanks for the directions, nothing can possibly go wrong this time :)
richardharmon
03-11-03, 17:41
Adam – What happened, what’s with the Mondeo!?
Supra is in bits, been gathering parts for a month or so, still waiting on a few new bits. It will be back, running 30psi, in a little while :D
Too cold outside to go and work on it though! I need a garage . . . :(
Originally posted by Adam W
Andy/Bob, you guys going? DOn't really want to take the mondeo but I could drive to your place and then chaffeur you there in Bobbehs car :D
I'd only let you drive my car if you turned up in a suit :D
Mondeo's are great!!!.... no wait, that's my car i'm thinking about ;)
Terminator
05-11-03, 00:30
Looking good, with a few new faces coming too.
Bugger, im going away a day early now, so wont be able to make it.
One day, one day, ill will make one..............
FaithStalker
05-11-03, 09:18
with all these new faces,
some digital photographs should be taken,
please ensure that the new face is positioned with his back to the bar
...and the camera is set to wide-angle
...and its hi res
....for zooming in
...on things that may.....be......in the background
............at said time of taking the photo
:thumbs:
One minor detail I forgot to ask...what time's the meet???
richardharmon
05-11-03, 16:40
Officially 7:30, I was there at about 8:30 last time though, but then I'm late for everything!
FaithStalker
05-11-03, 16:42
i bet thats what all the girls say....
babooooom-------tishhhhhhh !
:D
richardharmon
05-11-03, 16:48
You're right, but I guess it's better than been "too soon"! :D
FaithStalker
05-11-03, 16:50
richard - did you get the 2nd cat removed before the nur spec?
if so what boost did you get before you got the nur spec but after the 2nd cat removal
..and.
what boost do you have at the moment
do you need Fuel Cut Defender , boost control, restrictor rings etc etc ?
cheers
richardharmon
05-11-03, 16:51
Nothing implied by that last post :innocent:
richardharmon
05-11-03, 16:57
I have had the 2nd cat removed and the Blitz exhaust for about 12 months now, just got round to updating my signature!
Anyway in answer to your question:
I had the cat removed at the same time as the exhaust, so I don’t know what differences are made by the individual components. The car had a non-standard 2nd cat back system when I bought it though. Unfortunately I didn’t have a boost gauge installed until I changed the exhaust. Still I can say this, it was *definitely* faster after removing the 2nd cat and replacing the old (non-standard) system. I am running an indicated 0.95 bar in normal weather conditions but of late, when it’s been nice and cold at night I have seen it go just a touch over 1.0 bar. Saying that these are values indicated by the boost gauge, I suspect it reads a fraction high as I don’t yet have a FCD and I have never had it cut under full boost.
richardharmon
05-11-03, 16:59
Further to my last post, I don’t have a restrictor ring installed but I will be getting one of Chris Wilson’s first cat replacement pipes soon so I will most likely need one.
Originally posted by FaithStalker
with all these new faces,
some digital photographs should be taken,
please ensure that the new face is positioned with his back to the bar
...and the camera is set to wide-angle
...and its hi res
....for zooming in
...on things that may.....be......in the background
............at said time of taking the photo
:thumbs:
LOL Faith ;)
I tried to get em to do that the last time but they failed. :p
See you all there then :thumbs:
EDIT: Terminator, have you got any stock of polish at the mo, say 1 blue and 2 gold. PM me the price, ta....
vBulletin® v3.7.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.