Daston Posted January 5, 2008 Share Posted January 5, 2008 Hi guys I need to move the pipes that are infront of the rad to fit my FMIC. Would it be a problem for me to cut the pipes off at the side of the rad, attach rubber/silicon pipes and route through a 2 row cooler? Quote Link to comment Share on other sites More sharing options...
miko_supra Posted January 5, 2008 Share Posted January 5, 2008 careful with what hoses you use as its hydraulic fluid edit:not entirely sure otherwise Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 5, 2008 Share Posted January 5, 2008 The neatest way is to get an auto rad and use the cooler in the rad that's really meant for the auto box for the PAS. Quote Link to comment Share on other sites More sharing options...
Daston Posted January 5, 2008 Author Share Posted January 5, 2008 Ah good idea Chris! Is it ok to use silicon, rubber or braided hoses for the coolant? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 6, 2008 Share Posted January 6, 2008 Well, the hoses will be carrying PAS fluid, I'd just use normal oil hose, there will be no pressure involved as such. Quote Link to comment Share on other sites More sharing options...
Daston Posted January 6, 2008 Author Share Posted January 6, 2008 Cool cheers Chris Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.