MaRkYbOy72 Posted December 21, 2007 Share Posted December 21, 2007 I am considering removing my window tints from the front as I believe they are too dark (limo style). Is it an easy job and whats the best stuff to use to get all the glue and gunk off please? Many thanks Quote Link to comment Share on other sites More sharing options...
peter richards Posted December 21, 2007 Share Posted December 21, 2007 if you can find an edge , use a hair dryer and it should peel off , then just get a glue and tar remover to clean up any glue thats left , then a glass cleaner to finish off Quote Link to comment Share on other sites More sharing options...
DamanC Posted December 21, 2007 Share Posted December 21, 2007 if you can find an edge , use a hair dryer and it should peel off , then just get a glue and tar remover to clean up any glue thats left , then a glass cleaner to finish off Quote Link to comment Share on other sites More sharing options...
MaRkYbOy72 Posted December 21, 2007 Author Share Posted December 21, 2007 thank you. DO you just heat the edge of the tint or the whole window please? Quote Link to comment Share on other sites More sharing options...
peter richards Posted December 21, 2007 Share Posted December 21, 2007 bit at a time , try and not tear it as it gets messy it should start to ripple when hot enough then just ease it off , plenty of patience Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.