Chris and Alana Posted December 18, 2007 Share Posted December 18, 2007 Just collecting all the bits I need to install an EBC and after reading this http://www.mkiv.com/techarticles/blitz_dsbc/index.html I need 4 1/4" vacuum cap's to cap off some open ends. Where can I get them from? or what can I use? Thank's Quote Link to comment Share on other sites More sharing options...
Kev.O Posted December 18, 2007 Share Posted December 18, 2007 I ended up using some of the new boost line you need, and putting small caps inside. They were a real tight fit and there was no way it was going to come out. I recall these small caps being something off of a diesel car, though I can't remember what part. I used some 6mm fuel line for the actual hose. HTH Quote Link to comment Share on other sites More sharing options...
DamanC Posted December 19, 2007 Share Posted December 19, 2007 I ended up using some of the new boost line you need, and putting small caps inside. They were a real tight fit and there was no way it was going to come out. I recall these small caps being something off of a diesel car, though I can't remember what part. I used some 6mm fuel line for the actual hose. HTH Diesel injector somethings, cant quite put my finger on it. I used the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.