AEM boost sensor

[captainchaos]

Could someone please tell me what colour wires go to what when replacing the standard boost sensor,
thanks

chris

[Ryan.G]

Have you got the AEM Pro Software?

If so, Go to the directory where the software is saved and under aempro you will see instructions i.e C:\Program Files\AEM\AEMPro\Instructions

When you are in this folder look for the file name 10-2130 for Sensors 30-2130-XXX.pdf

All the info you need is in there to which pins on the sensor do what. Then just link them to the stock wiring. 5v pin goes to 5v supply wire (vcc) Ground goes to Sensors Ground wire (e2) - test with continuety check against intake manifold to make sure it is a ground. The Signal wire goes to Pim pin which will be the last pin left in the connect

HTH

[captainchaos]

thanks very much great help, gold star for you

[AshBhp]

:)

http://img.photobucket.com/albums/v20/ashbhp/Supra%20T51KAI%20BB/Map.jpg

[captainchaos]

ahhh no hang on ash gets the gold star and a 10p mix up

[Ryan.G]

Blimey Ash!

Someone has way too much free time :p

[captainchaos]

thanks very much to both of you big help

[AshBhp]

Blimey Ash!

Someone has way too much free time :p

Na, credit to a mate of mine. ;)