Daston Posted November 26, 2007 Share Posted November 26, 2007 Hi guys Had another look at my FMIC yesterday and it needs to go where these pipes are. Now normaly kits like HKS would have a relocator kit for these however mine wasnt an HKS kit and so dosnt have a relocator kit. can they be unbolted and put to one side? Or did you guys slacken them off and move them closer to the Rad? Also if I were to undo them to move them am I going to get liquid everywhere? Quote Link to comment Share on other sites More sharing options...
colsoop Posted November 26, 2007 Share Posted November 26, 2007 When my fmic was on. the u shaped cooling pipe was placed in front of the fmic via a long bracket. If you remove the pipes the ps fluid will come out of there quite quickly so do one at a time and have something to catch the fluid with. Quote Link to comment Share on other sites More sharing options...
Daston Posted November 26, 2007 Author Share Posted November 26, 2007 Ahh ok might make a long bracket up didnt realise there was enough room to bring it forward. Quote Link to comment Share on other sites More sharing options...
colsoop Posted November 26, 2007 Share Posted November 26, 2007 Ahh ok might make a long bracket up didnt realise there was enough room to bring it forward. From memory i think i replaced one of the ps hoses as it was a bit short to put it where i wanted it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.