Fully built bottom end

[michel lane]

I have available a fully built bottom end , this is based on the following :

Used block / honed / machined
Wisco forged pistons .20 over
Eagle H-beam rods
clevite bearings
ARP bolts
ARP head bolts
1.6mm hks gasket
New oil pump
Modified crank timing star

This is the same block that are in most of the cars that i do single upgrades for. So far 100% success rate on 5 engines with this spec. I have a 750hp engine running on this block for the past 11 months now. Manufactures of the rods and pistons have rated it to around 1200hp with supporting tune and custom main caps. This information is based on the US SUPRA FORUMS.

The price is based on exchange, fitting is available at £1500.

[Sean1933]

Sorry for the slight hijack but whats been done to the crank timing star and why? Cheers ;)

[michel lane]

Its been tig welded so it does not snap off when giving it WOT. This is a common problem with uprated cars above 550hp..

[suprafan72]

I have available a fully built bottom end , this is based on the following :

Used block / honed / machined
Wisco forged pistons .20 over
Eagle H-beam rods
clevite bearings
ARP bolts
ARP head bolts
1.6mm hks gasket
New oil pump
Modified crank timing star

This is the same block that are in most of the cars that i do single upgrades for. So far 100% success rate on 5 engines with this spec. I have a 750hp engine running on this block for the past 11 months now. Manufactures of the rods and pistons have rated it to around 1200hp with supporting tune and custom main caps. This information is based on the US SUPRA FORUMS.

The price is based on exchange, fitting is available at £1500.

Dan Turner quoted 10k for a similar spec hmmm:taped:

[michel lane]

I need to re-think my pricing structure then ....:rolleyes:

[wez_p]

I need to re-think my pricing structure then ....:rolleyes:

you need to stop building engines with no customer lined up yet and get me booked in for my install :p

[steb9780]

you need to stop building engines with no customer lined up yet and get me booked in for my install :p

Carry on then Wez, what install?? ;)

[b'have]

[QUOTE=michel lane;1689346]

This is the same block that are in most of the cars that i do single upgrades for. So far 100% success rate on 5 engines with this spec. I have a 750hp engine running on this block for the past 11 months now. QUOTE]

Could you post the dyno graph of this?

[michel lane]

Yes i can post a dyno graph of this , but just look at Jay cars , mpryde.

[b'have]

Yes i can post a dyno graph of this , but just look at Jay cars , mpryde.

Excellent, are they both 750hp? Don't get to see many uk builds producing dyno graphs up there.