Toad Alarm. Auto window function and fold in mirrors?

[Sparky]

Evening all.

My Supes got a toad ai606 alarm (fitted by the previous owner). Has anyone got any experience with setting up the Auto window function that i believe comes with this alarm?

Also is there a way to program one of the unused buttons on the keyfob to close my electric mirrors and open them again?

Thanks;)

[Masenko]

I've been trying to figure that out for ages, I have the same system!

[Sparky]

Im going to attempt the Window rollup function tomorrow. Im getting the manual off a mate later tonight, so i guess i'll know by tomorrow!

[Rayman]

http://www.eserviceinfo.com/downloadsm/17912/Toad_Ai606.html

This any use?

[edge]

Unless its got the added module it wont wind your windows up. (i tried) You could probably get a fitter to install one for you. Also not sure if this is the same for the fold in mirror function as mine has just got normal ones but if you can locate the locking signals and mirror closing switch i cant imagin it would be to hard to do.

[Sandy-m2]

I put the add on module on, nice and easy, also got the auto mirror close. it wasn't dificult

[djskeme]

I still wanna rig my car pc to switch on (likeignition on) when i unlcok my motor, but i dont know where the brain is normally located to trace the wiring.

Can anyone help me with this..I have the same alarm - sorry to hijack!

[Sandy-m2]

mine was on the right of the passanger footwell

[Sparky]

I put the add on module on, nice and easy, also got the auto mirror close. it wasn't dificult

Seems i'll be buying the window and mirror module then. Does anyone know where i can get them, or is it an alarm specialist job? Im pretty good with car wiring!:)

[Wazz72]

Do a search on ebay, thats were I got mine. Not fitted it yet though. Let me know how you get on with it.

[Dragon]

If your supra mirror folds away electronically, it should be a negative trigger to fold and unfold from its own module. The alarm will already have a negative output, and that can be wired up directly without any further modules.
The most ideal way of doing it, is using diodes on the central locking output of the alarm and have one wire to the mirror module and one to the central locking system to the car. By using the diodes it won't feed back. So when you arm and lock the car, it will also send the pulse to the mirror module and fold the mirror. When you disarm and unlock the car, this will send another pulse and unfold the mirror.

Regarding the windows, you will need to install a window closure module, and the white wire from the alarm is the timed output for the window closure module.

The alarm brain can be installed anywhere in the interior of the car, all depends on the fitter.

Hope that helps.

[ECK]

on the subject of the toad alarm , how do you switch on the chirp when arming and disarming the alarm, mine makes no noise and i want it to chirp is there a box with toggle switches for this function?
my alarm sounds fine when i set it off but i want the chirp function on, any help would be good thanks

alex

[Sandy-m2]

eck - drop me a pm with your email and i'll send you the manuals

[ECK]

eck - drop me a pm with your email and i'll send you the manuals

done!!!
;)

[Sandy-m2]

done