Glosphil Posted November 11, 2007 Share Posted November 11, 2007 Lesson learnt! A while ago I did my brakes etc and tightened my wheel nuts with the breaker bar I got to get the discs off. STUPID ! They were so tight, It broke my locking wheel nut remover when I tried to undo them. Spent today hammering 21mm sockets over them to remove them and only got 2 off so far. Bought a torque wrench, new lock nuts, and sockets. Cost of being an idiot, £90 Look on my face when the lock nut remove broke? priceless. Quote Link to comment Share on other sites More sharing options...
Havard Posted November 11, 2007 Share Posted November 11, 2007 Sounds like you need a hug mate!! Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted November 11, 2007 Share Posted November 11, 2007 Nothing wrong with a breaker bar, its just remembering how much it adds to torque;) If i wasn't being kind i would say its the person on the end of it:p Quote Link to comment Share on other sites More sharing options...
Glosphil Posted November 11, 2007 Author Share Posted November 11, 2007 Yeah I did try and guess the torque but I guess because of its length its not easy to judge. Frankly a stupid thing to do just because I didnt know where the normal one was lol Quote Link to comment Share on other sites More sharing options...
supra steveo Posted November 11, 2007 Share Posted November 11, 2007 opps Quote Link to comment Share on other sites More sharing options...
neil tt Posted November 12, 2007 Share Posted November 12, 2007 Oh dear:d Quote Link to comment Share on other sites More sharing options...
TLicense Posted November 12, 2007 Share Posted November 12, 2007 They've only got to be done to 103Nm. It's not all that much.... Quote Link to comment Share on other sites More sharing options...
AndyT Posted November 12, 2007 Share Posted November 12, 2007 Oops. 103 Nm in old money 76 lbf/ft. Really isn't a lot and was recommended setting by ProTyre. Therefore don't let anyone near your pride and joy with a air driven socket gun. Ever. Quote Link to comment Share on other sites More sharing options...
Chris and Alana Posted November 12, 2007 Share Posted November 12, 2007 I broke my locking wheel nut key not lond ago either trying to take the front wheels off so I could do my brakes, I know how you feel and it's not funny (well not at the time anyway ) Quote Link to comment Share on other sites More sharing options...
ivan Posted November 12, 2007 Share Posted November 12, 2007 Rule of thumb I always use is to do wheel nuts up as tight as you can manage by hand using a standard (about 1 foot) wheel brace. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.