Downpipe for UK tubbies

[razza]

Thinking about sticking some UK turbo's on a new engine but need the downpipe, anyone got one?

[Kev.O]

I bought mine from CW :)

[Paul Whiffin]

In stock here if needed.

[razza]

how much?

[Scooter]

if you are going to fit UK turbo's onto a jap engine can you not use the "exhaust two into one thing" (not sure of the actual name of this piece) from your jap car and hence retain the stock jap cat/decat pipes?

its just i thought from old threads that to change to uk turbos you need the tubos's and exhaust manifold only?

[razza]

I have absolutely no idea, so taking guidance on this please

[Scooter]

I have absolutely no idea, so taking guidance on this please

i'm not sure myself so will try and find some old threads......

[Scooter]

In Supraloopys third pic here is the bit i mean, its kinda of the first part of the exhaust after the turbo's (http://www.mkivsupra.net/vbb/showthread.php?t=130485) goes from two to one and where the 1st cat bolts on............obviously if you can use the j spec bits here you are sorted.........

[Scooter]

..........at the bottom of page 1 Tony's great twin turbo thread there is a picture of the stripped turbo assembly that shows the cast iron bits (everything between the two turbos) i "think" may be able to be used from your old car......... (http://www.mkivsupra.net/vbb/showthread.php?t=82952&highlight=twin)

[Paul Whiffin]

how much?

£141 inc delivery and VAT.

[razza]

Think I'll let ToyotaGT have a look for me and see if they can work it out, engine's aren't my strong point...

cheers for the help

[razza]

£141 inc delivery and VAT.

I'll let you know on that.

[superstar dj]

i've got a full stainless decat for uk spec if you need one mate.
£100 plus p+p:)

[razza]

i've got a full stainless decat for uk spec if you need one mate.
£100 plus p+p:)

Isn't this different from the down pipe though? I have decats, it's the downpipe from the turbo's that I'm questioning

[Paul Whiffin]

How many decat pipes have you got at the moment? 1 or 2?

[razza]

I've got full decat, the first one is a CW one which is on my JSpec engine currently, would this need to be changed?

[Paul Whiffin]

So your after the piece between the 1st cat and the turbos correct?

[razza]

apparently so:search:

[razza]

i've got a full stainless decat for uk spec if you need one mate.
£100 plus p+p:)

I'll let you know, I'm going to see if they fit first, if not I'll be in touch.

Cheers
Razza

[superstar dj]

ok mate:)