Supra ECU Register [Archive] - The mkiv Supra Owners Club

Wez

30-10-07, 17:31

supradibbs

15-11-07, 17:16

supradibbs mapped by ryan g superb 10/10

suprafan72

15-11-07, 17:46

Turbo T51... Originally mapped by Dan/AEM autotune 0/10 Now mapped by ryan g running a link 10/10

dazz

15-11-07, 19:46

Apexi Power FC, Manual, T-78 turbo. Mapped by Ryan G (One top bloke) I rate it 10/10.

740bhp @ 1.3bar
550lbft @ 1.3bar

Nic

16-11-07, 01:16

No complaints about the mapping of mine, it drives better than stock. Starts first turn of the key every time, very smooth and makes some good numbers, 10/10

Muffleman

27-11-07, 09:15

Roberts can be changed now :)

captainchaos

27-11-07, 09:43

so whats the best way to get in touch with ryan g to get mine mapped when its finished

Wez

27-11-07, 10:23

so whats the best way to get in touch with ryan g to get mine mapped when its finished

PM him and I am sure he will get back to you :)

Wez

27-11-07, 10:24

Roberts can be changed now :)

Updated, I think this is one of the first properly setup autos on an AEM :thumbs:

Muffleman

27-11-07, 10:26

Certainly is mate, knew it was possible just by looking at the options within the AEM, just needed someone decent behind the laptop ;)

rpslaughter1982

26-12-07, 17:51

would it be possible to find out from the AEM users who has a boost comp map and who has conventional ones? (or hybrids)

Chiefgroover

30-12-07, 11:13

AEM dimitri manual T04Z 10/10

Wez

30-12-07, 11:47

AEM dimitri manual T04Z 10/10

Updated :thumbs:

gaz1

30-12-07, 12:55

mine should read 2/10, will be remapped by ryan g as soon as its finished

Wez

30-12-07, 12:57

mine should read 2/10, will be remapped by ryan g as soon as its finished

Done :thumbs:

cheekymonkey

07-01-08, 12:27

Deffo stick me down. Apexi PowerFC on my 1996 TT6 mapped by RyanG with stock TTC , 10/10 :)

Vaughany

07-01-08, 12:34

Autronic ECU, PHR Stage 2+, will be fully mapped by Leon Green and Mark Sheedy (I think thats his name), Currently running base map until 2000 miles, seems to run fine, no probs with colds starts etc.

Wez

07-01-08, 12:42

Deffo stick me down. Apexi PowerFC on my 1996 TT6 mapped by RyanG with stock TTC , 10/10 :)

Done :thumbs:

yoshi_v300

31-01-08, 15:50

I'm running TOMS TECS ecu on my 2JZ-GTE Aristo.

It advances the ignition timing and definitely gives better low down 2000rpm response, revs a bit quicker also.

Boost seems to be set to 1.0bar max. and I presume a better fuel map. Fuel economy unchanged.

Wez

31-01-08, 16:08

bolarbag

31-01-08, 16:13

revs a bit quicker also.

At the expense of what I'd need to ask

Wez

31-01-08, 16:20

revs a bit quicker also.

How do you know this, how is it measured.

Quicker reving is normally due to reduction in rotational mass.

kslb

31-01-08, 16:35

Running GT67 DBB 6spd Mapped by Dan Its a bitch to start from cold but runs ok am looking for a re map before this summer. 5/10

Wez

31-01-08, 16:47

Running GT67 DBB 6spd Mapped by Dan Its a bitch to start from cold but runs ok am looking for a re map before this summer.

Rating 0 to 10?

Wez

31-01-08, 16:51

rob wild

31-01-08, 17:09

Hey Wez anymore at the inn :)

PHR Stage 1, AEM, BL Box + 3200stall, Ryan G mapped, Rating 9/10 (will be 10/10 once the cold start is tweeked)

Wez

31-01-08, 17:18

Hey Wez anymore at the inn :)

PHR Stage 1, AEM, BL Box + 3200stall, Ryan G mapped, Rating 9/10 (will be 10/10 once the cold start is tweeked)

Done, let me know when you want the rating increased to 10/10

Ryan.G

01-02-08, 08:35

Hey Wez anymore at the inn :)

PHR Stage 1, AEM, BL Box + 3200stall, Ryan G mapped, Rating 9/10 (will be 10/10 once the cold start is tweeked)

Hey Rob

Please could you contact me if there is something that needs a quick tweak on your car.

As this is the first i have heard of it and i like to make sure all the cars are perfect.

Thanks

Ryan.

Nic

01-02-08, 08:39

These are not mappable are they.

Denso in Japan can custom map them for TOMS/Customer

jevansio

01-02-08, 11:53

Just been told about this,

Name : Jevansio
ECU : AEM
Trans : Manual
Turbo : GT4088R
Mapper : Ryan

Rating wise he's great, I'll update with a x/10 when mapping is complete as we're still in progress with it

Vaughany

01-02-08, 21:21

Is this fully mapped now?

Hi Wez

Not fully mapped yet mate, changed to semi synthetic and a 4000rpm limit, hitting about 0.7bar now. I have got about another 900miles to go, I will let you know when it is done.

rob wild

02-02-08, 20:05

Hey Rob

Please could you contact me if there is something that needs a quick tweak on your car.

As this is the first i have heard of it and i like to make sure all the cars are perfect.

Thanks

Ryan.

Done, let me know when you want the rating increased to 10/10

10/10 please :) Ryan's just fixed it. Just to add as well that the reason for 10 is mainly how the car drives. Ryan(Michel) has done a brilliant job especially with regards to gear change points, throttle response, spool time and kick down. I finally understand the difference a good mapper makes to a car! In the sense it can really make/break(literally) a car! Top Job fella's :)

Robert

02-02-08, 23:27

Wez I had mine remapped by Ryan and i feel a 10/10 is in order :)

Wez

03-02-08, 17:53

Wez I had mine remapped by Ryan and i feel a 10/10 is in order :)

Updated :thumbs:

Jazzy

13-02-08, 23:45

Might be worth updating Ryan's to me, and the ECU is now AEM :)

Wez

13-02-08, 23:52

Might be worth updating Ryan's to me, and the ECU is now AEM :)

Well spotted, all sorted :thumbs:

jevansio

18-02-08, 09:12

Wez, as my mapping session is now complete I reckon 10/10 for Ryan please :D

Cheers bud

Wez

18-02-08, 11:10

Wez, as my mapping session is now complete I reckon 10/10 for Ryan please :D

Cheers bud

Updated.

Marty

18-02-08, 12:04

Marty, AEM, Manual, SPSSGT850W Turbo (sound performace t67), Dan, rating 5/10.

Wez

18-02-08, 12:15

Marty, AEM, Manual, SPSSGT850W Turbo (sound performace t67), Dan, rating 5/10.

Updated.

If you are not 100% happy with the mapping why dont you look at getting it sorted?

Marty

18-02-08, 19:16

Updated.

If you are not 100% happy with the mapping why dont you look at getting it sorted?

I am doing :) My car is off back up to Michel's soon anyway, so it will be getting remapped whilst its up there, to 1.4-1.5bar, by Ryan (dont know if he knows yet;))

vvteye

18-02-08, 19:32

Name : vvteye
ECU : OMEX 710
Trans : Manual
Turbo : GT4088R
Mapper : Dave from Interpro

and I da love it!

9/10 (needs more revs on cold start for a 10)

Wez

18-02-08, 19:37

Updated.

Nic

08-03-08, 01:46

Wez

08-03-08, 11:00

Wez

08-03-08, 11:04

dini_the_owl

08-03-08, 11:09

Hks v pro on my bpu+ was mapped by reg riemer of RCTS CANADA running great now 10/10

Wez

08-03-08, 11:15

Hks v pro on my bpu+ was mapped by reg riemer of RCTS CANADA running great now 10/10

Stock turbos with manual or auto?

Wez

08-03-08, 11:53

I have updated the first post, what do you think?

http://www.mkivsupra.net/vbb/showpost.php?p=1656098&postcount=1

Terminator

08-03-08, 12:46

Good job Wez, looks good from here.

Pig

08-03-08, 14:55

Where do i save the pic of my Dyno plot? Also, what are the chances of having it put into turbo size order?

Wez

08-03-08, 16:20

Where do i save the pic of my Dyno plot? Also, what are the chances of having it put into turbo size order?

You can sort by any column by click on the heading ;)

grahamc

15-03-08, 23:23

451bhp for mine...

once properly mapped, car was great to drive! Could have done with a little more time on the cold start...

Wez

17-03-08, 11:17

451bhp for mine...

once properly mapped, car was great to drive! Could have done with a little more time on the cold start...

Do you have a link to a dyno plot?

b'have

17-03-08, 11:29

Could you update mine please Wez?

Wez

17-03-08, 12:01

Could you update mine please Wez?

Done :thumbs:

gaz1

17-03-08, 13:04

mine is a t67dbb wez;)

Nic

17-03-08, 13:10

Wes here's my link

542ps

http://www.mkivsupra.net/vbb/vbpicgallery.php?do=big&p=8908

kslb

08-04-08, 08:38

Mine now re mapped by Ryan G and making 577bhp at the fly @ 1.25bar (VVTI)
Excellent driveability.

10/10

Could Mod ammend the table, cheers.

Wez

08-04-08, 10:22

Mine now re mapped by Ryan G and making 577bhp at the fly @ 1.25bar (VVTI)
Excellent driveability.

10/10

Could Mod ammend the table, cheers.

If you provide a link to your dyno plot I can add that as well :D

Lebsteif

09-04-08, 13:56

Name:
Lebsteif
ECU:
Link G3
Trans:
Manual
Turbo:
BL T61
Mapped By:
Ryan G:
Rating:
10/10
Result:
Unknown yet.

:)

Wez

09-04-08, 14:10

Name:
Lebsteif
ECU:
Link G3
Trans:
Manual
Turbo:
BL T61
Mapped By:
Ryan G:
Rating:
10/10
Result:
Unknown yet.

:)

Done

michel lane

11-04-08, 08:22

Name:michel lane
ECU:AEM
Trans:Manual
Turbo:SP74DBB
Mapped By:Ryan G:
Rating:10/10
Result:550RWHP@1.1 BAR NOW AT 1.5 ?

johnd-mkiv

13-04-08, 14:07

Name:John Doodes
ECU:POWER FC
Trans:Manual
Turbo:PHR GT60
Mapped By:Ryan G:
Rating:10/10
Result:511.6bhp at 1.2bar

Wez

16-04-08, 17:29

Updated, if you guys can provide links to dyno plots I will update the results section.

Tannhauser

17-04-08, 18:31

My car won't be finished until the stock clutch is replaced and we can up the boost pressure a bit.

However, in the meantime, here are my details:

Manual transmission
264 cams
BL61 turbo
AEM ecu
Mapped by Ryan
Score for mapping is 10/10
Making 504 BHP at about 0.95 bar

http://i251.photobucket.com/albums/gg301/Tannhauser_bucket/rollingroad002.jpg

I'll write a review of the mapping and the whole car saga when I get chance.

Wez

17-04-08, 22:48

My car won't be finished until the stock clutch is replaced and we can up the boost pressure a bit.

However, in the meantime, here are my details:

Manual transmission
264 cams
BL61 turbo
AEM ecu
Mapped by Ryan
Score for mapping is 10/10
Making 504 BHP at about 0.95 bar

I'll write a review of the mapping and the whole car saga when I get chance.

Hiya matey, all added :thumbs:

Lee P

07-05-08, 14:32

Name: Lee P
ECU: AEM
Trans: Manual
Turbo: 2835 Twins
Mapped By: Dan
Rating: 8/10
Result: 665bhp & 1.5 bar

Will be remaped by Ryan when back on the road

Lee

Wez

07-05-08, 14:55

Name: Lee P
ECU: AEM
Trans: Manual
Turbo: 2835 Twins
Mapped By: Dan
Rating: 8/10
Result: 665bhp & 1.5 bar

Will be remaped by Ryan when back on the road

Lee

Do you have a dyno plot for this setup as I could add a link.

Nic

07-05-08, 16:03

yoshi_v300 TOMS Auto Stock TT Denso - Japan 7/10 waiting

Denso Japan only got 7/10 for their mapping :rlol:

Wez

10-05-08, 23:44

Updated.

I will add more power figures when the dyno plots are available :thumbs:

Wez

12-05-08, 12:52

Updated: added b.weeks results from SRR

Wez

14-05-08, 09:53

Updated with SteveL dyno plot.

rpslaughter1982

05-06-08, 22:29

Name:
rpslaughter1982
ECU:
AEM
Trans:
Manual
Turbo:
PHR street
Mapped By:
Matt AFR
Rating:
10/10
Result:
450bhp 1.2bar

Wez

06-06-08, 00:33

Name:
rpslaughter1982
ECU:
AEM
Trans:
Manual
Turbo:
PHR street
Mapped By:
Matt AFR
Rating:
10/10
Result:
450bhp 1.2bar

Can you provide a dynoplot as I can add a link to that as well ;)

Muffleman

06-06-08, 10:40

Can you provide a dynoplot as I can add a link to that as well ;)

I'll print another off the dyno Wez and host when I get a sec, wont be straight away though mate as on hols next week and flying round like a looney getting stuff done :D

Wez

06-06-08, 10:45

I'll print another off the dyno Wez and host when I get a sec, wont be straight away though mate as on hols next week and flying round like a looney getting stuff done :D

OK cool, let me know and I will update the list.

supra61

03-07-08, 17:35

Name Supra61
Ecu Power fc
Trans Manual
Turobs Stock
Mapped by Ryan G
Rating 10/10
Result 407Bhp @1.2bar
407ftlb.

Wez

03-07-08, 18:57

Name Supra61
Ecu Power fc
Trans Manual
Turobs Stock
Mapped by Ryan G
Rating 10/10
Result 407Bhp @1.2bar
407ftlb.

I have added you, if you can get me a link to your dyno plot I will put the result up as well.

:thumbs:

imi

12-07-08, 13:48

Name imi
Ecu AEM
Trans 6sp Manual
Turobs BL T61 DBB
Cams 264/264
Mapped by Ryan G
Result 545Bhp @1.4bar (Flywheel)
440ftlb.

Dyno Plot to follow.......many thx Wez

Wez

12-07-08, 13:57

Name imi
Ecu AEM
Trans 6sp Manual
Turobs BL T61 DBB
Cams 264/264
Mapped by Ryan G
Result 545Bhp @1.4bar (Flywheel)
440ftlb.

Dyno Plot to follow.......many thx Wez

Added, let me know when the dyno is available and I will update, you didnt provide a rating either ;)

imi

12-07-08, 14:12

Added, let me know when the dyno is available and I will update, you didnt provide a rating either ;)

When you say rating, I am assuming of the mapping - if so, then i'll give Ryan an 8/10.

You dont get 10/10s out of me that easily ;)

Wez

12-07-08, 14:14

When you say rating, I am assuming of the mapping - if so, then i'll give Ryan an 8/10.

You dont get 10/10s out of me that easily ;)

Updated :thumbs:

imi

15-07-08, 12:25

Added, let me know when the dyno is available and I will update,

Hi Wez

Dyno Plots posted here:

DYNO PLOTS (http://www.mkivsupra.net/vbb/showpost.php?p=2035588&postcount=240)

Many thx and great effort.

imi

Wez

15-07-08, 13:07

Hi Wez

Dyno Plots posted here:

DYNO PLOTS (http://www.mkivsupra.net/vbb/showpost.php?p=2035588&postcount=240)

Many thx and great effort.

imi

Updated.

imi

15-07-08, 14:48

Updated.

thx wez - the torque is around 435lbs, still low compared to the other specs on the chart

Wez

15-07-08, 19:11

thx wez - the torque is around 435lbs, still low compared to the other specs on the chart

Sorted, I imagine the torque was down due to lack of timing as the intake temps were high.

Sort the intake temps out and dump a load more timing in, you should see a nice improvement.

Not bad figures though.

Lee P

17-07-08, 10:31

Name Lee P
Ecu AEM
Trans 6sp Manual
Turbos HKS 2835 Twins
Cams Custom
Mapped by Ryan G (remap)
Result 708bhp, 515ftlb

10/10 :thumbs:

Wez

17-07-08, 10:57

Name Lee P
Ecu AEM
Trans 6sp Manual
Turbos HKS 2835 Twins
Cams Custom
Mapped by Ryan G (remap)
Result 708bhp, 515ftlb

10/10 :thumbs:

Updated.

SupraHuman

17-07-08, 16:49

Name Suprahuman(CK)
Ecu:AEM
Trans:BL auto box(3800 stall TC)
Turbo:GT35R
Cams:264/264
Mapped by Ryan G
Result: 580bhp and 520ftlb(difficult to dyno the car with the autobox and high stall TC so it over-read.According to Michel there is more like 550bhp but the dyno said 580.I have not seen the dyno print out yet.)
Rating:10/10

Wez

17-07-08, 22:42

Wez

25-08-08, 22:10

Added new details for JamieP :thumbs:

Chingy

25-08-08, 22:34

Name Chingy
Fcon Pro
Trans 6sp Manual
Turbo HKS T04z
Cams Stock
Mapped by Mr Ito (Do-Luck)
Result 607bhp, 556ftlb

10/10 mental:blink:

Wez

25-08-08, 23:04

Updated Chingy and Ashbhp, graphs also added :thumbs:

Chingy

25-08-08, 23:28

cheers buddy sorry realised now i forgot to attach graph, but cheers for sourcing it :thumbs:

supragold

26-08-08, 13:18

My dyno is hub figures. What are all the figures on the register? Hub or fly just so i can see where mine is on the scale of things

Wez

26-08-08, 13:35

My dyno is hub figures. What are all the figures on the register? Hub or fly just so i can see where mine is on the scale of things

Depends, most are fwhp, I only post numbers if a graph is included.

tooquicktostop

26-08-08, 13:38

Mine gets mapped this thursday at AFR, Matt you are welcome to put the figures and graph up if you wish, best thing for me to be in sunny Spain during mapping, cant stand watching the car on rollers !!

bonus_2000

03-09-08, 22:52

Can I be added please?

Mapped by Ryan 10/10 , Boost Logic (Precision) T67 DBB, 264 inlet and exhaust cams, AEM management, 644.2 Bhp and 520 ft lb

Attached dyno plot.

Wez

03-09-08, 23:22

Can I be added please?

Mapped by Ryan 10/10 , Boost Logic (Precision) T67 DBB, 264 inlet and exhaust cams, AEM management, 644.2 Bhp and 520 ft lb

Attached dyno plot.

Done.