View Full Version : For Sale A Few Bits
set of hks can gear £75 SOLD
manual ecu TT 6 speed £65 SOLD
full manual TT 6 speed wireing loom with hks fcd attached £100 SOLD
jspec turbos £100
uk turbos £175
uk turbos £175
uk manifold £25
uk manifold £25
jspec cams £25
uk rear lights £65
alterantor £55
starter motor £65 SOLD
top glove box £50
standard cam pullys £25
oil pump £55
jspec crank £75
jspec injectors on rail £25
oil cooler with filter relocation £65 SOLD
cranks position sensor £25
jspec head £150
oem head bolts £50
oil squirters £15
jspec conrods £65
auto fly wheel £25
boost pipeing £25
boost pipeing £25
boost pipeing polished £35 SOLD
RobSheffield
24-10-07, 21:14
What make and condition is the filter relocator/cooler?
Any pics?
its in like new condition cant remember the make buddy
RobSheffield
24-10-07, 21:25
Could you find out and post up some pics?
Im sorting out mine at the moment
yeah no worries if you want im near modowhall tommorow if you would like to check it out for yourself
RobSheffield
24-10-07, 21:27
Ahh im working til 5 mate :(
Chuck me a PM tomorrow to keep the thread on track :)
not a problem im not there till around 8
Hi mate whats the jap turbos like?
they were fine when i took them off buddy
first dibbs on polished boost pipes, any pics?
will put pics up later for ya
open to offers need to make some space in the garage
RobSheffield
27-10-07, 02:01
Any pics yet on the relocater/cooler kit?
first dibbs on polished boost pipes, any pics?
any pics?
sorry boys been flat out you will have then tomorow oil cooler is now sold
how many miles were on the turbo's, both jap and uk?
with the uk ones can you do a straight fit on a jap TT? do you need to do anything else, i.e. mapping etc.?
also any pics on the polished boost pipes?
no you will need the manifold to make it fit which i have but no you wont have to have them mapped
The UK lights, do these have a built in Fog? and is it easy to return My Jspecs back to two reverse Lights and use the switch i have to use the Jspec Fog to operate the New Uk Fog?
i dont no mate these are just the light caseings buddy there will be a thread on here somewhere that tells you how to do it im sure
how many miles have the sets of turbos done?
which the jspecs or the uk specs
either, if I can find a downpipe for the UK's I'll take those, if not the JSpecs will do.
you would be better off with the uks mate alot stronger they have they came off an engine that had done around 45000 miles so i was told
I'll try and get the downpipe then get back to you.
Cheers
Razza
I'll try and get the downpipe then get back to you.
Cheers
Razza
I believe you'll also need the EGRV that is only found on the UK/US specs.
I believe you'll also need the EGRV that is only found on the UK/US specs.
a what not? What's one of those?
a what not? What's one of those?
A ceramic valvey-thing that goes between the turbos and downpipe, if I'm not mistaken. Although I probably am.
anyone else got any ideas about this?
I'll take the UK's and manifold please:d
I'll worry about the pipe etc. later..
How do you want paying?
will you be picking them up
no, they'll need sending to Toyota GT in Hook:
Toyota GT / 3S Service Centre
3S Service Centre
Unit 3 Oak Farm Nurseries
Winchfeild
Hook
Hants
RG27 8BX
I'm taking it £175 is for both turbos (not each) as you them down twice??
yeah but thats just for the turbos not for the manifold
it will be £250 for the lot to be bolted directly on and that includes all the pipeing aswell
sorry not sure where that price has come from as the turbos are £175 and the manifold is £25....what's the extra £50 for?
Postage its heavey as hell over 25kg
open to offers need to make some space in the garage
how about £220 then?;)
if you want to get your own courior thats ok with me and then it will be £200
so, you're not open to offers then?
fair enough, what's the dimensions of these? I'll have a quick check to see if I can get any cheaper to deliver, if not I'll go with yours.
vBulletin® v3.7.1, Copyright ©2000-2008, Jelsoft Enterprises Ltd.