To all single drivers! What manifold do you have installed?

Due to all the fuss in my other tread (http://www.mkivsupra.net/vbb/showthread.php?t=121779) I desitet to start this tread!

Would be grat if you could wright what you got, up´d N´down´s, good or bad thing´s regarding it!

Please can a mod turn this into a poll.

The manifold´s could be

HKS

BL

XS power

Homemade

ect ect (Dont know that many )

BL

Yes it goes up and down and kinda squiggly too

It's a good thing

HKS, 6 months use so far.

http://img232.imageshack.us/img232/8885/attachment1phpxa1.jpg

http://img232.imageshack.us/img232/323/attachment2phptb5.jpg

HKS here.

Boostlogic. It's a 1000 miles old and still working

BL here, done 11,000 miles and so far and no issues.

HKS, 18 months old, 6 months of hard work and no problems

BL 2 years old, no issues

SP (Sound perfeormance) No issues, 2k miles

PHR (which is HKS) for over a year, no issues now or during installation

HKS.

8000 miles so far. No problems.

Bl

XS Power. It's been on for acout 9 months and done 7000 miles.

Fitment was not great and the mouinting for the wastegate was wrong causing the wastegate to hit the block.

Following Ryan and Gaz's threads I would not recommend using one.

If I were buying new it'd be a heat coated BL.

Poll added

Got the a XS power manifold going on in Nov..

Its been machined to be usable according to Jezz and im bringing it with me tomorrow as im hoping some of the more technical bods will have a quick look at it;)

Jamie

xs power manifold mods completed by self were

Re-drilled bottom mounting holes to give better clearance

Cut into two sections and re-skim facing due to it being distorted from new.

weld on some supporting braces as cracks started to appear on welds along n01 and n06 tubes.

quite happy with it now

HKS and no problems.

Induction Motorsport cast manifold, have an Arnout manifold waiting to go on though

PHR cast manifold. Haven't driven the car much but no issues with it so far. Fit was fine although it's not the prettiest manifold you've ever seen. Good for quick spool

So 3 XS manifolds posted in the thread, but the poll is being won by the XS option?

So who are all the closset cheap skates........

BL, 3 years 4 months, 12,000 miles, heat wrapped and no issues

HKS, excellent fit etc.

Had SP, where the pipes joined the head plate they were too wide to get bolts to tighten up properly. HKS worth the extra dough.