Guest mattwilliams Posted August 20, 2007 Share Posted August 20, 2007 Anyone know what the jap number plate sizes are for the front and rear? mine has a uk one on the rear but you can see a cut out in the bumper where i think the jap one should go. Matt Quote Link to comment Share on other sites More sharing options...
simon2610 Posted August 20, 2007 Share Posted August 20, 2007 hi matey i bought a set of plates the other day and i had to cut the back one down but got them to put the letters lower down rough size around about 32cm across and about 21cm down hope that helps you mate Quote Link to comment Share on other sites More sharing options...
DaveK Posted August 20, 2007 Share Posted August 20, 2007 The (rear) size you want is 13" x 7" which most number plate makers can do as a standard size. Sadly - I ordered a normal UK size before taking the old plate off and seeing the big square hole. Then I ordered a square one (something like 12 x 8) without measuring the hole and discovered it was too tall, and not wide enough. Eventually I measured it and ordered the correct size (I used pl8tes4u or something like that). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.