TyranoSupraRex
15-08-07, 17:12
Right... seeing as I only have one reverse light (thanks to the lovely fog mod :( ) I decided to buy some really bright LED reverse bulbs so that I can see when i reverse through the tinted rear window. This was a great idea I thought and went trawling the internet and ebay until I found a link to some bulbs (See below)
The problem is that the bulb is a 7443, which fits the socket but has a dual filament, and the 7440 is a single filament. These equates to the bulb having 4 wires on the bottom instead of 2. Is there any way to join them up so that I can use these bulbs cos currently, the copper bits don't line up?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&itemcount=8&sspagename=MERC_VIC_RSCC_Pr8_PcY_BIN_Stores_IT&refwidgetloc=closed_view_item&usedrule1=StoreCatToStoreCat&viewitem=&refitem=200137935594&item=200139995277&refwidgettype=cross_promot_widget
The problem is that the bulb is a 7443, which fits the socket but has a dual filament, and the 7440 is a single filament. These equates to the bulb having 4 wires on the bottom instead of 2. Is there any way to join them up so that I can use these bulbs cos currently, the copper bits don't line up?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&itemcount=8&sspagename=MERC_VIC_RSCC_Pr8_PcY_BIN_Stores_IT&refwidgetloc=closed_view_item&usedrule1=StoreCatToStoreCat&viewitem=&refitem=200137935594&item=200139995277&refwidgettype=cross_promot_widget