brettjones Posted August 14, 2007 Share Posted August 14, 2007 how do i get more boost i have done a bpu full decat with r/ring but only have 1.0 bar Quote Link to comment Share on other sites More sharing options...
Ian W Posted August 14, 2007 Share Posted August 14, 2007 it's likely you've just got a 1.0bar restrictor ring in mate so you'd need to physically turn it up. A digital boost controller is your best bet as you can set the boost digitally and turn it up at the flick of a switch Quote Link to comment Share on other sites More sharing options...
Steviekid Posted August 14, 2007 Share Posted August 14, 2007 how do i get more boost i have done a bpu full decat with r/ring but only have 1.0 bar Get a restrictor ring with a larger diameter or a boost controller. Quote Link to comment Share on other sites More sharing options...
dini_the_owl Posted August 14, 2007 Share Posted August 14, 2007 what exhaust are you running? stock one will only let you boost to that anyway Quote Link to comment Share on other sites More sharing options...
Nic Posted August 14, 2007 Share Posted August 14, 2007 Either file out the hole in the restrictor ring to reduce restriction and therefore increase boost. Or if it was me I'd fit a boost controller and use that to up the boost. Quote Link to comment Share on other sites More sharing options...
merckx Posted August 14, 2007 Share Posted August 14, 2007 It will go up a little when it gets cold in the winter. The easiest way is to fit an electronic boost controller and it will increase the boost you've got to 1.2bar. The cheapest way is to fit a bleed valve but you'll have to adjust iit manually. Quote Link to comment Share on other sites More sharing options...
Homer Posted August 14, 2007 Share Posted August 14, 2007 Looking at your times Brett, are you sure boost is your issue? They were quite low considering you're seeing 1.0bar. At that boost even my manual managed a 13.6 and 110mph temrinal, the auto should be 0.5s quicker than that. Quote Link to comment Share on other sites More sharing options...
Daston Posted August 14, 2007 Share Posted August 14, 2007 I am currently running 1 bar due to fuel cut and managed 14.01 or something as my best time (I am a noob tho) Quote Link to comment Share on other sites More sharing options...
Homer Posted August 14, 2007 Share Posted August 14, 2007 I am currently running 1 bar due to fuel cut and managed 14.01 or something as my best time (I am a noob tho) What was your terminal though? Thats the one that matters Quote Link to comment Share on other sites More sharing options...
Daston Posted August 14, 2007 Share Posted August 14, 2007 uhh not much over 100 I dont think 110 I think was my best. Quote Link to comment Share on other sites More sharing options...
Homer Posted August 14, 2007 Share Posted August 14, 2007 uhh not much over 100 I dont think 110 I think was my best. 100 to 110 means a BIG difference in power, NA's can get up to 95mph terminals. A stock auto should be able to get 105mph terminal. Adi even made a 12.8 @ 111mph at 1.2bar (basic bpu mods) on an otherwise standard auto road car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.