PDA

View Full Version : Sold TRD LSD in j-spec auto casing

Gruggs
11-08-07, 20:01
Hi Guys,

Used TRD LSD in J-spec auto casing. Will also include the carrier bearings when i receive them from Dusty.

I intended to fit this to the car but found mine already has a LSD and i'm planning on selling to fund a 911.

£400 plus p&p.

Cheers

G
Gruggs
12-08-07, 20:42
Bumpy Bump bump
Gruggs
02-09-07, 09:22
Open to offers. No-on wanting to upgrade to a TRD diff?

Cheers

G
uzthedentist
02-09-07, 10:19
hmm would you take 300
RobSheffield
02-09-07, 10:26
Who fitted the LSD into the casing?
Garfy
03-09-07, 12:04
are drive shafts needed aswell?
csa
03-09-07, 14:42
would you consider shipping to denmark?
Andyhannah
03-09-07, 15:14
Who fitted the LSD into the casing?

I think this lsd was supplied from lucifer at mkivstore.

Andy
michel lane
03-09-07, 15:52
its an auto unit , it wont fit a manual . different fitment
RobSheffield
03-09-07, 15:55
I think this lsd was supplied from lucifer at mkivstore.

Andy

Cheers

its an auto unit , it wont fit a manual . different fitment

Yep, had that confirmed...
gambie
03-09-07, 18:06
thats my old diff
Gruggs
13-10-07, 10:25
bump
JamieP
13-10-07, 11:14
its an auto unit , it wont fit a manual . different fitment

It will fit if you use the auto center section of the prop aswell, but be warned it lowers the gearing so the car tops out at 150ish on a manual but makes the car come on boost nice and fast thoughout the gears.:)
Gruggs
13-10-07, 11:17
dont think anyone knows more about difffs than JamieP........well breaking them! :d
fastisnice
13-10-07, 11:28
It will fit but it will break, i've done it once:innocent:

It will fit if you use the auto center section of the prop aswell, but be warned it lowers the gearing so the car tops out at 150ish on a manual but makes the car come on boost nice and fast thoughout the gears.:)
Gruggs
17-12-07, 22:24
bump.
looking for £300.

Cheers

G
Gruggs
17-12-07, 22:25
get a nice xmas present for that special someone in your life...the supe!

Cheers

G
csa
18-12-07, 13:54
will you ship that to dennmark?
DamanC
18-12-07, 14:59
Out of interest, what is involved in fitting it to a 96 auto TT?
Gruggs
18-12-07, 15:13
will you ship that to dennmark?

yup no problems.
Gruggs
18-12-07, 15:14
Out of interest, what is involved in fitting it to a 96 auto TT?

Should be fine. Only thing is that when removing the current one you will bugger the carrier bearings. Been advised of this by a number of people including Chis Wilson.

Fortunately, the diff comes with all new bearings as well.

Cheers

G
johnd-mkiv
13-06-08, 17:59
Did this sell?
Gruggs
13-06-08, 18:01
yes this is gone i'm afraid.