*NEW* PHR Standard Performance Head

[Joeatphr]

New PHR Standard Performance head allows you to add aftermarket cams and change the internals without spending an arm and a leg! We have come together with Supertech to create a Standard size Intake and Exhaust Valve that will allow it to fit into the head without any machine work done. This will compensate the fitment issues that we have had in the past with Ferrea. Problem with Ferrea they would NEVER fit the stock head like the stock Toyota Valves would, we always had to have the head bored out for the valves to seat flush to make perfect clearance. Ferrea has had quality control issues with the Valves and have fallen in quality. With Supertech Valvetrain it makes a quick and easy removal of the head or stock Valvetrain and then replaced with the new head or Supertech Standard Size Valves to go in its place without the hugh expense! This allows you to build your head for the performance needs to suit the larger stroke or larger cams that you have been wanting to use!

Supertech and PHR have made these valves happen for the Supra needs and we have 10 sets on the shelf ready to go! This is an exclusivity for PHR ONLY and once they're gone it will be 2 months+ getting more back in stock!

Here are the new prices;

PHR Standard Performance Head - $2600 USD

This product does include a brand new head from Toyota with full Supertech Valvetrain and Single Valve Springs!

Dual Valve Spring Option - $350 USD

Supertech Standard Valve Kit - $675 USD

This does include 1 set of (12) Intake and Exhaust standard size Valves.

This has been what you mates have been waiting for so please let us know if you have any questions or information on these newly released products!

Cheers,

Joe

[Jezz]

So for $2950, I get a brand new re-worked head with supertech valves and dual valve springs already built up, so I just need to add cams ya? Any polishing or porting work done on the head?

[Joeatphr]

Yes it is a Brand New head ready to fit in but does not include Port and Polishing. If you would like that option please refer to our Street Port and Polished Head and we can suppliment the 1mm over for Standard Size Valves. Keep in mind that the Port and Polishing does take extra time and is not on the shelf.

Cheers,

Joe

[Peter P]

Hey Joe,

Anything similar or planned for the 2JZ-GE engine?

Could this be fitted to the GE bottom end?

Know you guys in the US are doing much bigger things with the lowely GE lump! ;):d

Cheers,

Pete :)

[Joeatphr]

Hey Joe,

Anything similar or planned for the 2JZ-GE engine?

Could this be fitted to the GE bottom end?

Know you guys in the US are doing much bigger things with the lowely GE lump! ;):d

Cheers,

Pete :)

Im sure we could build you a head no problem!! Send me an email and Ill see what I can do for you.

Cheers,

Joe