Greddy 4 Row Smic

[michel lane]

I have a used Greddy 4 row SMIC , it has some pipes . This ideal for cars with active spoilers and want to go single . The US guys are running 600hp with this setup for road racing circuits. Its rated for around 700hp on the greddy site. I bought it in for a client for his single conversion , but he has let me down and not answering his PM or messages. So his loss your gain . Price new for one of these units is around $1200 + shipping for the core only.

[michel lane]

i measured this SMIC , its a great wopping 5.5 inch deep !!!!!....no wonder its rated to 700hp....

[michel lane]

This fits in a stock position ......rare to get hold of .......

[Ark]

Have you got a link for the claims on the Greddy site?
And photos, since it's in used condition...
thanks

[Ark]

:bump:

I'm interested, but need to know exact condition and what pipes etc are included.

[michel lane]

Sorry i havent got back to you on this. There is no info on the greddy site for this SMIC as its supra specific. This SMIC is used commonly in the US for Road racing cars which run between 500-600hp on singles. I know from past experiance these units have got a very good reputation for there cooling compared to standard units, as they use the same core as the greddy 4 row unit, but half the size , the 4 row is rated for 1000hp.

the condition is good, Ill take some pics and post them. I would invest in a set of hard pipes for this cooler .

[michel lane]

Here are some pics of the smic ..look at the end tanks and how well they are designed ...

[TopgunTT]

Do you know if this is a straight swap for the stock smic?

[michel lane]

YES, its designed as a direct replacement.

[Terminator]

I can confirm that it fits as I have one in a MKIV TT. They are as rare as chickens teeth in the UK.

[Mcgoo]

I can confirm that it fits as I have one in a MKIV TT. They are as rare as chickens teeth in the UK.

I am just waiting for a reply from Michel to confirm my purchase of this. Does the wheel arch liner still fit with this SMIC fitted?

[imi]

Michel, what pipes are included as I am looking to stay SMIC with my new Single setup?

[Wez]

Blimey, thats a large SMIC.

[Terminator]

My stock arch liner is still in place. I left out the stock duct from the bumper to the stock SMIC. I could have modified it to improve air flow, but never bothered as my charge temps were much lower, than my shot OME SMIC, without ducting. It never came of the to do list. It would be interesting to see what charge temps you get if you duct it.

[michel lane]

thanks phil, it is large 5 inch thick, yes they are rare. forget the pipes they were provided but dont fit anything.

[michel lane]

sold , thanks for looking