gaz1 Posted July 5, 2007 Share Posted July 5, 2007 any thoughts Quote Link to comment Share on other sites More sharing options...
Muffleman Posted July 5, 2007 Share Posted July 5, 2007 0.5bar by 3800 and 1.0bar at 4600, what ar is yours gaz ? Quote Link to comment Share on other sites More sharing options...
Ian R Posted July 5, 2007 Share Posted July 5, 2007 Glad I can turn my laptop on its side Quote Link to comment Share on other sites More sharing options...
gaz1 Posted July 5, 2007 Author Share Posted July 5, 2007 0.5bar by 3800 and 1.0bar at 4600, what ar is yours gaz ? err is it stamped on the turbo:D Quote Link to comment Share on other sites More sharing options...
Muffleman Posted July 5, 2007 Share Posted July 5, 2007 Does 0.96 ring any bells ? Quote Link to comment Share on other sites More sharing options...
Homer Posted July 5, 2007 Share Posted July 5, 2007 If I'm reading those correctly : 1.4bar and only 396rwhp 1.0bar reached at 4400rpm Quote Link to comment Share on other sites More sharing options...
gaz1 Posted July 5, 2007 Author Share Posted July 5, 2007 Does 0.96 ring any bells ? not sure mate i just said 500 bhp and they done the rest Quote Link to comment Share on other sites More sharing options...
wkdtime Posted July 5, 2007 Share Posted July 5, 2007 If I'm reading those correctly : 1.4bar and only 396rwhp 1.0bar reached at 4400rpm I think it made 396 RWHP at 1.0 Bar, not 1.4Bar. Which are respectable numbers on a dyno that seem's to give conservative numbers. Quote Link to comment Share on other sites More sharing options...
Muffleman Posted July 5, 2007 Share Posted July 5, 2007 It was 396rwhp at 1.4bar mate, 343rwhp at 1.0bar. Just seems to be coming in later than I would expect for a 4088. Quote Link to comment Share on other sites More sharing options...
wkdtime Posted July 5, 2007 Share Posted July 5, 2007 It was 396rwhp at 1.4bar mate, 343rwhp at 1.0bar. Just seems to be coming in later than I would expect for a 4088. Had another look, your right. Quote Link to comment Share on other sites More sharing options...
Clarkey Posted July 5, 2007 Share Posted July 5, 2007 It was 396rwhp at 1.4bar mate, 343rwhp at 1.0bar. Just seems to be coming in later than I would expect for a 4088. My T61 at 1.15 bar of boost made @ flywheel 456bhp @ 6200 RPM 442 ft lbs of torque @ 4300 RPM IIRC the RWHP was something like 360-375. Dynoed at SRR. That was with a EM Blue (mapped by Ian C) & Greddy 3 row Quote Link to comment Share on other sites More sharing options...
Wez Posted July 5, 2007 Share Posted July 5, 2007 For comparison here is my PHR Stage 1, 1.4bar @ SRR Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.