Good Exchange Rates At the Moment

[Nic]

For those that don't know, the US$ and HK$ are pegged to each other, the pound is very strong at the moment, which makes it cheaper than ever to purchase from here :)

If I can help anyone with anything, just give me a shout.

[wallace9]

I might be looking for some shocks. (The yellow blisteins)
I'm going to check out my cross member bolts at the weekend to check that its not loose ones causing my knocking before I order but if you could let me know a price so as I know.

Cheers

[hoff]

Nic can you post some rough prices for volk/rays etc 18" wheels and some tien super streets. Cheers matey.

[wallace9]

ooooooo, super streets. Might just upgrade to them.

[hoff]

Both are great but i like the adjustable ride height on the tiens.

[wallace9]

Yeah well I've just had my bumper repaired cause my car is so low so adjustable would be good :)

[carl0s]

Yeah how much for the following:

1x Volk GT-AV 18x9 +41 offset
1x Volk GT-AV 18x10 +43 offset

My front one is kerbed a bit, and I had a polishing accident on the rear one.

I actually only need the outer rim part, but Dusty tells me that Volk don't sell the outer part by itself, hence making the two-peice element of them absolutely frikin pointless :grr:

[Pete]

According to xe.com it's gone over 2$ - 2.00197 :)

[Nic]

I might be looking for some shocks. (The yellow blisteins)
I'm going to check out my cross member bolts at the weekend to check that its not loose ones causing my knocking before I order but if you could let me know a price so as I know.

Cheers

Here you go:

Bilstein Dampers x 4 = £394 inc postage

cheers

[neil tt]

:dThe problem is you still need money to get a good exchange rate

[wallace9]

Cheers for the prices nic.
I'll let you know next week.

If I change my shocks will I need a wheel allignment done??
Think I know the answer here but if someone could confirm it for me. cheers :)

[neil tt]

Without question:)

[carl0s]

Cheers for the prices nic.
I'll let you know next week.

If I change my shocks will I need a wheel allignment done??
Think I know the answer here but if someone could confirm it for me. cheers :)

If you change dampers only and use the same springs then no you won't.

You shouldn't be doing anything that adjusts either geo or ride height in doing that.

[carl0s]

Cheers for the prices nic.
I'll let you know next week.

If I change my shocks will I need a wheel allignment done??
Think I know the answer here but if someone could confirm it for me. cheers :)

If you change dampers only and use the same springs then no you won't.

You shouldn't be doing anything that adjusts either geo or ride height in doing that, unless the Billies are shorter than what you have on at the mo.

[Nic]

The exchange rates continue to get even better, so get ordering now :)

[gjp]

I've given you a list of bits im after and still no prices :rolleyes:

[hoff]

Hi nic. With the rate being better, how great of a differance will it make to the wheel quotes I asked you about? By the way im getting closer to something close to what I need:)

[Nic]

I've given you a list of bits im after and still no prices :rolleyes:

Hi Gary

Finally got the info at the weekend (not dealt with some of the RX7 suppliers before so it took a while :complain: ), I'll work out delivered prices and get back to you tomorrow.

cheers

[Nic]

Hi nic. With the rate being better, how great of a differance will it make to the wheel quotes I asked you about? By the way im getting closer to something close to what I need:)

Please don't make me do all those prices again :cry:

Let me know final decision and I'll check.

[madmunky]

How much can you get headlights for at the moment, any kind that isnt yellow ;)

[gjp]

Hi Gary

Finally got the info at the weekend (not dealt with some of the RX7 suppliers before so it took a while :complain: ), I'll work out delivered prices and get back to you tomorrow.

cheers

:OK:;):friends::yahoo:

[hoff]

Please don't make me do all those prices again :cry:

Let me know final decision and I'll check.

Lol, sorry nic. I think your solution is best. Cheers matey:)

[V300]

Howdy Nic,
looking for these parts new.

37511-30020. I need two of these, Propshaft Donuts.

48710-30110. I need two of these, Rear suspension arms.

90369-43005. One only, rear wheel bearing kit.

45700-30020. One only, steering damper.

and shipping to my address in Ireland.

Thanks !!

[Sharpie]

According to xe.com it's gone over 2$ - 2.00197 :)

Still over $2 (USD) even now.

£1 = $15.7 (HKD)

[V300]

Any luck with this Nic.... ?

Howdy Nic,
looking for these parts new.

37511-30020. I need two of these, Propshaft Donuts.

48710-30110. I need two of these, Rear suspension arms.

90369-43005. One only, rear wheel bearing kit.

45700-30020. One only, steering damper.

and shipping to my address in Ireland.

Thanks !!

[V300]

Will I forget about this Nic, as it's been a while now, or it is in progress ?

I'll need an answer either way soon, please.

[Nic]

Prices sent, apologies for the delay took a little time to get quotes from Toyota.

cheers