2JZ-GTE ports

[Chris Wilson]

Anyone got any head chop photos showing the stock ports on a 2JZ-GTE head? Like these of one of my scrap RB26 Skyline heads:

http://www.chriswilson.tv/RB26_Head

[carl0s]

Anyone got any head chop photos showing the stock ports on a 2JZ-GTE head? Like these of one of my scrap RB26 Skyline heads:

http://www.chriswilson.tv/RB26_Head

Groovy. Did you cut that yourself?

Nope, I can't help :)

[Alex]

I've heard of people doing this on the 2JZ....but then they keep the results to themselves :(

It needs someone to make a financial sacrifice me thinks.

[AshBhp]

Someone must have a damaged head.

[Mike]

Michael? :d

[tooquicktostop]

I have a damaged head and block, you are welcome to chop away as long as the good bits (HKS cams and HKS pulley's are given back to me ;)

[Chris Wilson]

It's not a problem, I have a scrap N/A and a scrap TT head here, it's just I didn't want to risk band saw blades if pics already exist, although a hands on pair of halves is always better. I'll cut one when i get some spare time. Thanks.

[Chris Wilson]

I have a damaged head and block, you are welcome to chop away as long as the good bits (HKS cams and HKS pulley's are given back to me ;)

Thanks, see below, I have some scrap bits myself, much appreciated though :)

[dandan]

Sorry please ignore my post...

[Ian C]

That exhaust port looks a bit poo, or doesn't the convolutions in it matter much?

-Ian

[dandan]

I think you are seeing some of the section (or beak or divide) between the two halves of the port there Ian - just where the port divides from one to two. So... it looks worse than it is, seemingly dropping sharply en route to the throat area.

[Digsy]

I think they've had to dodge it up over that additional core under the exhaust. Possibly an additonal coolant channel?

Does look rather odd...

[dandan]

The last two pics show what I am talking about clearest.

[bolarbag]

I see what you mean, what is the two channels for then, one for the exhaust gases and the other...?