PDA

View Full Version : True twin conversion.


Barry
21-08-03, 14:32
Does anyone who lives round the north / north west london area know who to do this conversion on the stock setup?

I want to give it a try but dont want to try it without knowing what pipes to remove/cut.. etc....

YES, Ive used the search button but didn't find anything.

YES, I've read the article on mkiv.com but as above, dont want to risk cutting the wrong hose!!! :blink:

Anyone help?

Ta.

Mark Ayling
21-08-03, 14:52
Can't help you with what to do exactly, but I do know you don't cut any hoses - John (dude) swapped mine over and back by just disconnecting a couple and connecting them to somewhere else (great description I know!), it took seconds...

Barry
21-08-03, 15:08
Reading the artical on mkiv.com, its show a permanent way rather than just connect up a couple of hoses, which they say is not recomended for permanent use.

I would like to try it out first I suppose, just to get a feel for it.

Just thought, I wander if I'd need to do the 12v fuel pump mod too? Or shall I stop being a tight arse and just get the fueling sorted once and for all.!!! :(

Mark Ayling
21-08-03, 15:45
I think the method dude used is just so you can try it out first - like you say, you wouldn't want it like that permanently.

I tried it and although it was interesting I prefered the sequential setup. Also, in TTC mode my Hiper sounded completely different, less "burble" but deeper, then when the turbos kicked in it frigging screamed :D. I still prefered the sequential mode though....