Henk Posted June 1, 2007 Share Posted June 1, 2007 Hi all, In preparation for the SEM meet tomorrow I checked all the fluids etc. etc. and I wondered what the little grey cap is here: In front of radiator behind bumper in the recess where the horn sits. 2 thin hard pipes go into the little box, there a little glass window you can look into and what looks like a grey unscrewable cap with an 'H' on it. Can go take picture if needed. (TT GZ Auto J-Spec) Quote Link to comment Share on other sites More sharing options...
Pig Posted June 1, 2007 Share Posted June 1, 2007 Aircon i think Quote Link to comment Share on other sites More sharing options...
DaveK Posted June 1, 2007 Share Posted June 1, 2007 I also thought air con. I am wondering why you're doing a full fluid check for a meet that's less than 10 miles from where you live though! Quote Link to comment Share on other sites More sharing options...
D8MOA Posted June 1, 2007 Share Posted June 1, 2007 its the high pressure side of the aircon Quote Link to comment Share on other sites More sharing options...
merckx Posted June 1, 2007 Share Posted June 1, 2007 The low pressure side is near the bulkhead , always fill via the Low pressure side. Quote Link to comment Share on other sites More sharing options...
Henk Posted June 1, 2007 Author Share Posted June 1, 2007 I also thought air con. I am wondering why you're doing a full fluid check for a meet that's less than 10 miles from where you live though! It might be because I did >500 miles this week (on my private track ) and wanted to make sure nothing had leaked away, sprung a leak etc. Bear in mind I am paranoid about my little baby! Quote Link to comment Share on other sites More sharing options...
Class One Posted June 1, 2007 Share Posted June 1, 2007 Aircon valve. Just leave it, it's fine. See you tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.