Flaw Detector.

Anyone know where to get this? crack detector spray, on line, been searching but found nothing, and i have nowhere local that does.

Try Gooling for "dye penetrant" suppliers.

How big is the part? If it's a reasonable size and can be posted then I might be able to get it done for you, dye pen and x-ray facilities at work.

If not then as said before you need to serch for 'dye penetrant'

How big is the part? If it's a reasonable size and can be posted then I might be able to get it done for you, dye pen and x-ray facilities at work.

 

If not then as said before you need to serch for 'dye penetrant'

Its an oil pump, just want to be sure before it goes on, trouble is its booked to be done next Monday.

Have done a search and only found one product but not sure if this will do the job as there is no info.

Shame at the timescale as it would need to get to me, be slotted in at work and then returned to you by post Saturday so you can fit it Monday

What's the product you've found?

This sort of thing would do DIY wise: http://www.molyslip.co.uk/flaw.html

Same principal as we use with the dye etc.

This any good?

http://www.frost.co.uk/item_Detail.asp?productID=8885&frostProductName=Crack%20Tester%20(3%20x%20400ml%20cans)

This any good?

http://www.frost.co.uk/item_Detail.asp?productID=8885&frostProductName=Crack%20Tester%20(3%20x%20400ml%20cans)

That stuff looks OK to me

Thanks guys:) i'll try some of that, i now actually thinking of taking it to my local friendly alloy welder to see if it can be reinforced safely.