PAG Posted May 5, 2007 Share Posted May 5, 2007 Fit like lads?I have a question i tried to take off the side repeaters today im going to be fitting clear ones at some point was just being nosey really but could i f**k get them off whats the knack tried pushing,pulling,twisting but they just wont budge?Any help would be apreciated.Cheers. Quote Link to comment Share on other sites More sharing options...
uk-rich Posted May 5, 2007 Share Posted May 5, 2007 i thnk they are attached from the rear Quote Link to comment Share on other sites More sharing options...
PAG Posted May 5, 2007 Author Share Posted May 5, 2007 Bizzare so have to take off the inner arch liner to get to them bit of a hassle to change them over.Cheers il have a look tomoz. Quote Link to comment Share on other sites More sharing options...
gambie Posted May 5, 2007 Share Posted May 5, 2007 if you are changing them small screwdriver in the side and new shape celica ones fit perfectly Quote Link to comment Share on other sites More sharing options...
PAG Posted May 5, 2007 Author Share Posted May 5, 2007 Cool il have a look at them.Do you mean that the supra ones can be prised off from the side? Quote Link to comment Share on other sites More sharing options...
ivan Posted May 5, 2007 Share Posted May 5, 2007 If you're talking about the ones in the bumper, they're held in by 2 screws. You'll have to prise the inner wing back to get the drivers side. The passenger side is just doable from under the indicator. The ones higher on the wing are a slide and push fit. Quote Link to comment Share on other sites More sharing options...
Jiversteve Posted May 6, 2007 Share Posted May 6, 2007 The ones higher on the wing are a slide and push fit. 2 flexible clips, could be either end of the fitting. It will only move one way as the clips at the other end are fixed. Quote Link to comment Share on other sites More sharing options...
PAG Posted May 6, 2007 Author Share Posted May 6, 2007 Its the ones that are on the wings the little orange square ones? Quote Link to comment Share on other sites More sharing options...
ivan Posted May 6, 2007 Share Posted May 6, 2007 In that case it's as Jiversteve said. One end of the repeater is clipped in, the other end is a press-in clip. It will slide one way and lift out. Quote Link to comment Share on other sites More sharing options...
PAG Posted May 6, 2007 Author Share Posted May 6, 2007 cheers lads il try it later on and let you know how i get on.Do they need a fair bit of force to come out the clip dont want to break anything! Quote Link to comment Share on other sites More sharing options...
PAG Posted May 6, 2007 Author Share Posted May 6, 2007 Ta for your help i got them off tonight easy when you know how eh lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.