Help

[Yes ive used the search!]

I know the bagdes on the car are pinned from and rear etc, but whats the best way to get under them? without trashing the paint?.

Ive got some brand new badges direct from toyota and i want to replace then, but am unsure how to get the others off without trashing paint work.

Any tips anyone?

Cheers

ide say a hair dryer mate - loosen the adheasive (if there is some?)

use some finsing line to slide behind to break seal? I have done that before and it works well.

ide say a hair dryer mate - loosen the adheasive (if there is some?)

 

use some finsing line to slide behind to break seal? I have done that before and it works well.

correct quickest and neatest, then use a tar remover product to clean and prep the surface.

Dental floss, slide it beneath the badge to loosen the glue ? foam stuff then pull clear. followed by tar remover or t cut or something similar to remove residue.

I have used a CC in the past... Works a treat..

I have used a CC in the past... Works a treat..

Still have to pay the money back though.. eventually

Hi all, thanks for that. i used the string method etc.......came off a treat all new badges fitted and now looking sharp as hell.

Thanks for you input, i would never of thought of that method.