PDA

View Full Version : Coil connectors/wiring


jamesmark
19-03-07, 16:23
Just ordered some new connectors, however when my connectors were taken off the wires were just put on the pins.

My car is SORN so not been driven.

When I do the connectors is there a certain way the wires go as in a certaill wire goes to the left and to the right? As knowing in Toyota it will not be a case of as long as they are on it will be fine.

Cheers.

Ian C
19-03-07, 19:20
This may help:

http://www.mkivsupra.net/vbb/showthread.php?t=61141

Apparently the white seal goes on the wire next to the connector's locking tab, and I've got a picture of the wire with the blue seal on, so that wire colour *doesn't* go next to the locking tab :)

-Ian

jamesmark
19-03-07, 20:31
Cheers Ian, I knew I was not seeing things when I had seen that thread I could not sodding find it.