UK Supra Wheels

[UK Supra TT]

Hi all,

I bought some wheels for drag racing my MKIV UK Supra, they are:

http://i18.photobucket.com/albums/b111/JohnShepley/b0ea_1.jpg

http://i18.photobucket.com/albums/b111/JohnShepley/b078_1.jpg

PCD 5x114.3
17"
+38 offset

I offered them up to the car and they didn't seem to fit at all! Is there a different fittment on UK supras? The spacing on the studs was quite a bit further apart on my supra than the wheels, im confused, am i being stupid or something??

Any help apreciated, cheers guys

[Alex]

5x114.3mm is correct for ALL MKIV Supra's.

[UK Supra TT]

Hmm that is odd then, i'll have to have another go, thanks for the quick reply Alex

[i-macca]

They look in the pic like they may be multi-fitment as in there's two sets of bolt holes with different PCD's? Maybe you just offered up the wrong set of bolt holes?

[UK Supra TT]

Possibly, I only did it quickly as I had to do something else more urgently, but the other set of holes looked almost straight so they might be for show, from memory is didn't look like there was a lip for the bolt to catch on, if u know what i mean

[UK Supra TT]

........infact if you look at the photo you can see what i mean

[hoff]

Do they cover the uk brakes?

[jamesmark]

UK 17's have an offset of +50 but depends on wheel design

[UK Supra TT]

Well there going on the back since there for drag racing (I only have two, which have Nitto 555 Drag Tyres on them) they certainly clear the rear brakes

[garethr]

If you don't have spigot rings the wheels could have been a good few mm off-centre.

[UK Supra TT]

If you mean the plasic inserts on the back of the wheel, then I have those so hopefully that should be ok