Electronic guru's

[DamanC]

Guys, ive hit a brick wall :(

Just had my AEM AFR gauge sensor plumbed in, but havent a clue what im doing next to give it power. There are only 2 wires that need power, a red and a black one. I havent a clue what im doing when it comes to anything like this. Would it be posible for any of you guys to give me a hand? I make great tea ;) or if need be someone to say join that wire to that and the other to that one :)

[heckler]

connect the red wire to any 12v feed - i took mine of the head unit. the black wire can be connected to any bare metal (chassis) point.

[DamanC]

I dont know what a 12v feed is :(


Yes i know, i am really that useless :(

[heckler]

ahhh... ok.. erm... a power supply to the head unit - usually a red or yellow wire.

[letmeshowyou]

Daman, I know you got this sorted now but be careful if you've taken the 12v feed for the head unit. I'm pretty sure thats the one I used for power to your edfc. It's probably time to get a new power feed run for all these aftermarket things :)

[DamanC]

Oh fucksticks :(

Just seen this :eek: Yeah, it came from the head unit, and guess what? Ive got a bloody whistle :D :(