jevansio Posted March 7, 2007 Share Posted March 7, 2007 Can anyone tell me (esp for the defi gauges) if it's a 60mm gauge is that the size of the hole you need to accomodate the barrel of the gauge, or is it the size of the widest part of the bezzel (if so what is the size of the barrel of the gauge). Failing that can anyone tell me if it's possible to mount 3 x 60mm gauges in a single din slot, or for that matter 6 x 60mm gauges in a double din slot, Ta Jay Quote Link to comment Share on other sites More sharing options...
Nic Posted March 7, 2007 Share Posted March 7, 2007 Jay, 60mm is the size of the hole, see dimensions of the Defi BF gauges here: http://www.nippon-seiki.co.jp/defishop/product/bf/bf_spec.html The DIN slot is not big enough to fit either 60mm or 52mm gauges. Quote Link to comment Share on other sites More sharing options...
Ian W Posted March 7, 2007 Share Posted March 7, 2007 Jay, 60mm is the size of the hole, see dimensions of the Defi BF gauges here: http://www.nippon-seiki.co.jp/defishop/product/bf/bf_spec.html The DIN slot is not big enough to fit either 60mm or 52mm gauges. what size are the guages in the single din sized triple guage holder that Ed bought off you Nic? Quote Link to comment Share on other sites More sharing options...
Nic Posted March 7, 2007 Share Posted March 7, 2007 what size are the guages in the single din sized triple guage holder that Ed bought off you Nic? Not sure, but smaller than 52mm, see size here: http://www.nippon-seiki.co.jp/defishop/product/din/din_spec.html Quote Link to comment Share on other sites More sharing options...
Ian W Posted March 7, 2007 Share Posted March 7, 2007 Not sure, but smaller than 52mm, see size here: http://www.nippon-seiki.co.jp/defishop/product/din/din_spec.html ah right. very smart bit of kit that Quote Link to comment Share on other sites More sharing options...
jevansio Posted March 7, 2007 Author Share Posted March 7, 2007 Jay, 60mm is the size of the hole, see dimensions of the Defi BF gauges here: http://www.nippon-seiki.co.jp/defishop/product/bf/bf_spec.html The DIN slot is not big enough to fit either 60mm or 52mm gauges. Cheers Nic, back to the drawing board then Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.