Lebsteif Posted March 3, 2007 Share Posted March 3, 2007 Can i simply use the white wire from the AEM wideband guage to connect it with the single wire 02 sensor in the car? Quote Link to comment Share on other sites More sharing options...
bondango Posted March 3, 2007 Share Posted March 3, 2007 Unfortunately The White wire sends a 0-5v signal representitive of the wideband AF signal, the stock oxygen sensor sends a 0-1v signal to the ECU, so it wont do. There are a few Widebands that can simulate a stock sensor output IIRC but the 6in1 isnt one of them. Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted March 3, 2007 Author Share Posted March 3, 2007 Thanks for your answer Quote Link to comment Share on other sites More sharing options...
tDR Posted March 3, 2007 Share Posted March 3, 2007 MAP2 ECU can take a wideband o2 sensor input and simulate the output of the stock narrowband to the factory ECU, and as such you can even make adjustments to closed loop mode fuelling Cheers, Brian. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.