Jump to content
The mkiv Supra Owners Club

Idle problems


Marty
 Share

Recommended Posts

Got bit of a strange idle problem with the supe. Its only just started doing this in the last week, since the battery died, not that im convinced its linked, the ecu's had time to sort itself out etc.

Basically, it wont idle. I'll start it, and unless i hold the revs on with the throttle, it dies. Also, when i am holding the revs on using the throttle, it wont hold a constant rev, it constantly varies up and down +/- 500rpm.

Maybe an idle control valve issue? Also as i say, was fine last week.

Im still trying to sort out my afr's etc, but i dont think this could be the problem, its running a lil bit rich but staying above 11.5ish all the time.

Any ideas?

Ive done a bit of a search but cant find any similar problems

Link to comment
Share on other sites

Got bit of a strange idle problem with the supe. Its only just started doing this in the last week, since the battery died, not that im convinced its linked, the ecu's had time to sort itself out etc.

Basically, it wont idle. I'll start it, and unless i hold the revs on with the throttle, it dies. Also, when i am holding the revs on using the throttle, it wont hold a constant rev, it constantly varies up and down +/- 500rpm.

Maybe an idle control valve issue? Also as i say, was fine last week.

Im still trying to sort out my afr's etc, but i dont think this could be the problem, its running a lil bit rich but staying above 11.5ish all the time.

Any ideas?

Ive done a bit of a search but cant find any similar problems

 

I've had similar problems with my NA, was given this link by another member, hope it helps:

 

http://www.mkivsupra.net/vbb/showthread.php?t=67386&highlight=ICV

 

good luck with sorting it

:)

Link to comment
Share on other sites

ooh, thanks :thumbs:

I'll wip it off and have a look at it ;)

Gives me something to do today at least :D

 

If you look at Tlicense "blitz twin installation thread (im always recommending that thread :D ) he has a few pictures of the IAC and the correct orientation to refit the rubber gasket and little valve If you forget.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.