gzaerojon
28-02-07, 21:29
Hi Everyone
Just wanted to say a huge thank you to everyone who voted for me to stay on as a trader, and thanks for all the Headlights orders i have done for members :)
i have a few new things happening this year.
headlight induction tube
This will be a 120mm tube section fitted through the drivers headlight, but with a slight difference to most that are out there. I have just had a full perspex tube section made up, the idea being that once fitted it will retain the Crystal clear appearance of the headlight, Also i will be making a fitting on the back of the headlight to fit a High beam light so that it will remain "legal" but with the option of removing it for track days/drag racing etc.
Headlight induction replacement
there has been a version of this floating around, but for people who don't know, it is a air scoop that fits in place of the drivers headlight allowing maximum air flow to the after market induction kit, this will be available in any colour.
Clear Lenses and fibreglass insides
same sort of idea as the Abflug headlights, i am looking into making clear perspex lenses (with no marks) to fit on the original headlight backs. Also i will be having a custom insert made to fit inside. these will only be offered to people with facelift headlights as the high beam reflector has the focus formed on it, i will do some research on pre facelift lights and see if there is a way of making them legal.
if there is anything anyone has to suggest then please feel free to add you thoughts bellow.
Thanks again everyone :)
Best Regards Jon
Just wanted to say a huge thank you to everyone who voted for me to stay on as a trader, and thanks for all the Headlights orders i have done for members :)
i have a few new things happening this year.
headlight induction tube
This will be a 120mm tube section fitted through the drivers headlight, but with a slight difference to most that are out there. I have just had a full perspex tube section made up, the idea being that once fitted it will retain the Crystal clear appearance of the headlight, Also i will be making a fitting on the back of the headlight to fit a High beam light so that it will remain "legal" but with the option of removing it for track days/drag racing etc.
Headlight induction replacement
there has been a version of this floating around, but for people who don't know, it is a air scoop that fits in place of the drivers headlight allowing maximum air flow to the after market induction kit, this will be available in any colour.
Clear Lenses and fibreglass insides
same sort of idea as the Abflug headlights, i am looking into making clear perspex lenses (with no marks) to fit on the original headlight backs. Also i will be having a custom insert made to fit inside. these will only be offered to people with facelift headlights as the high beam reflector has the focus formed on it, i will do some research on pre facelift lights and see if there is a way of making them legal.
if there is anything anyone has to suggest then please feel free to add you thoughts bellow.
Thanks again everyone :)
Best Regards Jon