d9988 Posted February 27, 2007 Share Posted February 27, 2007 What goes in the small hole that's on the bottom front of the picture? The kit didn't come with any instructions, but I think I have most if it figured out except for this. From the pics on MKIV tech article, it looks like a stock oil pressure sensor screws directly into that hole. Can anyone verify this for me? Quote Link to comment Share on other sites More sharing options...
uk-rich Posted February 27, 2007 Share Posted February 27, 2007 it will be for a aftermarket temp/pressure sensor Quote Link to comment Share on other sites More sharing options...
MONKEYmark Posted February 27, 2007 Share Posted February 27, 2007 should have them grub screws to block all unused holes.when i fitted mine the pipe work was a bit on the tight side.was not long enough when it came to mounting it on fuel filter location screw. Quote Link to comment Share on other sites More sharing options...
ajazyasin Posted February 27, 2007 Share Posted February 27, 2007 they should have suppied 2 blanker screws. They are, as mentioned, for temp&press sensors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.