PhilMorrison Posted February 25, 2007 Share Posted February 25, 2007 Okay, perhaps a rather difficult question, that I'll only find the answer to when I come to throw it all together or map it, but:::: If I have a UK auto 2jz GTE engine, a Getrag 6 speed box, a Jspec TT manual engine loom, and an AEM EMS, with the AEM 3.5bar map sensor. Am I going to find I need any extra sensors, or to replace/modify any sensors or connection/plugs to make it all work together? Cheers Quote Link to comment Share on other sites More sharing options...
TLicense Posted February 25, 2007 Share Posted February 25, 2007 It depends.... Do you have a MAF sensor? If so you will need an intake air temp sensor. Other than that, I think, it should all work OK. Quote Link to comment Share on other sites More sharing options...
PhilMorrison Posted February 26, 2007 Author Share Posted February 26, 2007 Because I have bought everything seperately, and the engine is a UK Auto, I pressume that it was originally a MAF setup. Is this the case for 100% of UK Supra's? So that would mean I DO need the intake air temp sensor. I forgot that MAP still requires temperature compensation, so thanks for that . Where does the air intake temp sensor fit? I guess I'll stick a wanted post up for one Quote Link to comment Share on other sites More sharing options...
TLicense Posted February 26, 2007 Share Posted February 26, 2007 Well yes you do need a IAT, but, what I'm trying to understand is, have you got one already as it's stock on the J-spec engine, and if you have the loom, then you may have the sensors. On a j-spec it fits on the inlet plenum. On the UK spec, it's part of the MAF sensor, hence why they don't have a sepeate one, but you need it to use the AEM. Hope that helps. Quote Link to comment Share on other sites More sharing options...
PhilMorrison Posted February 26, 2007 Author Share Posted February 26, 2007 Yeah that's great help thanks . I don't have the loom with me at the moment, but I pressume it doesn't include any sensors.. I'll check it out, and pick up an IAT sensor if I need it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.