Guest seanchp Posted February 20, 2007 Share Posted February 20, 2007 Im having trouble with my avcr, it will not let me boost up to 1bar?? I have had no problems with getting to 1 bar until I turned the avcr off-to the stock settings, and ow I can not for the life of me get me car to boost back up to 1 bar? ANY THOUGHTS OR SUGGESTIONS WOULD BE MUCH ABLIGED!! THANKS Quote Link to comment Share on other sites More sharing options...
michael Posted February 20, 2007 Share Posted February 20, 2007 What's the duty set to? Quote Link to comment Share on other sites More sharing options...
Guest seanchp Posted February 20, 2007 Share Posted February 20, 2007 What's the duty set to? The duty is set about 75, but in the other settings I have all of the duties raised to +30, which seems a bit extreme, but my stupid car will not boost past .75 bar?? The wierd thing is that If I turn it off, it will go back down to .5 bar, but when i turn it back on-set at 1 bar, it will only hit .75-.80. The only way that I can get a steadily higher boost level is when i raise the boost level to say 1.2 bar. Then it gets closer to my objective of 1bar?? Quote Link to comment Share on other sites More sharing options...
michael Posted February 20, 2007 Share Posted February 20, 2007 Have you checked for boost leaks? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.